PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 30307DT
30307DT ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 21.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, style_designator: UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30307DT
NSN: 3110-00-156-8037
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width21.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter80.00 MILLIMETERS NOMINAL MM
bearing_preload_designationLIGHT
standard_tolerance_designationABEC NO.1
NSN3110-00-156-8037
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30307DT · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING PRELOAD DESIGNATION: LIGHT
•
OVERALL OUTSIDE DIAMETER: 80.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
STYLE DESIGNATOR: UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
•
BORE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
BEARING PRELOAD DESIGNATIONLIGHT
OVERALL OUTSIDE DIAMETER80.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
STYLE DESIGNATORUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH21.0 MILLIMETERS NOMINAL MM
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
MATERIALSTEEL BALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
7307DInterchangeable
interchangeable cross-reference
interchangeable
GC810NH1Interchangeable
interchangeable cross-reference
interchangeable
7637639P0001Interchangeable
interchangeable cross-reference
interchangeable
7307DTInterchangeable
Same NIIN cross-reference
interchangeable
SG3086-60Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30307DT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30307DT?
30307DT is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 30307DT?
There are 5 known substitutes for 30307DT: 7307D, GC810NH1, 7637639P0001 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30307DT?
30307DT is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30307DT

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026