PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 302867
302867 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND, overall_width: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-066-5075, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
302867
NSN: 5340-01-066-5075
FSC: 5340
CAGE: H0G87 — WIBA ZEVENAAR B.V. (NLD)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
overall_width0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
cushioning_environmental_protectionWEATHER RESISTANT
material_document_and_classificationAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end0.717 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-416 TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-01-066-5075
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 302867 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
SURFACE TREATMENT: CADMIUM BAND
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHION
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
LOOP INSIDE DIAMETER: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND
SURFACE TREATMENTCADMIUM BAND
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
LOOP INSIDE DIAMETER0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONWEATHER RESISTANT
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
OVERALL WIDTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
STYLE DESIGNATOROFFSET MOUNT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
AS21919WDG43Upgraded Successor
successor cross-reference
successor
10086625Upgraded Successor
successor cross-reference
successor
AS21919Upgraded Successor
successor cross-reference
successor
TA1718SS4TUpgraded Successor
successor cross-reference
successor
SAE-AS21919Upgraded Successor
successor cross-reference
successor
10117251Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 302867?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 302867?
302867 is a CLAMP,LOOP.
What parts can replace 302867?
There are 34 known substitutes for 302867: AS21919WDG43, 10086625, AS21919 and 31 more. Substitute compatibility should be verified for your specific system.
Is 302867 still available?
302867 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 302867

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026