PartsTable
Technical Data Sheet
Download PDF

302815 — CONDUCTOR SECTION,TUNED CAVITY

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

302815: CONDUCTOR SECTION,TUNED CAVITY.

The CONDUCTOR SECTION,TUNED CAVITY is a the manufacturer industrial component. Key specifications include shape: CYLINDRICAL, material: RUBBER SYNTHETIC OVERALL, overall_length: 2.688 INCHES NOMINAL IN, hardness_rating: 57.0 SHORE DUROMETER A MINIMUM AND 67.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 4.660 INCHES NOMINAL IN, overall_diameter: 0.810 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-110-5694, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 302815
NSN: 5330-00-110-5694
NIINs: 001105694, 009662859
FSC: 5330 — Packing and Gasket Materials
CAGE: 78640 — MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC (USA)
SPECIFICATIONS
shapeCYLINDRICAL
materialRUBBER SYNTHETIC OVERALL
overall_length2.688 INCHES NOMINAL IN
hardness_rating57.0 SHORE DUROMETER A MINIMUM AND 67.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter4.660 INCHES NOMINAL IN
overall_diameter0.810 INCHES NOMINAL IN
special_featuresGASKET IDENTIFIED BY YELLOW STRIPE
style_designatorCIRCULAR
aperture_diameter4.281 INCHES NOMINAL IN
maximum_pressure_rating400.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.166 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-110-5694
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 302815 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.166 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 400.0 POUNDS PER SQUARE INCH (PSI) LBS
•
HARDNESS RATING: 57.0 SHORE DUROMETER A MINIMUM AND 67.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 4.660 INCHES NOMINAL IN
•
APERTURE DIAMETER: 4.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.166 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING400.0 POUNDS PER SQUARE INCH (PSI) LBS
HARDNESS RATING57.0 SHORE DUROMETER A MINIMUM AND 67.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER4.660 INCHES NOMINAL IN
APERTURE DIAMETER4.281 INCHES NOMINAL IN
SPECIAL FEATURESGASKET IDENTIFIED BY YELLOW STRIPE
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
6664119Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 302815?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 302815?
302815 is a CONDUCTOR SECTION,TUNED CAVITY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 302815?
There is 1 known substitute for 302815: 6664119. Substitute compatibility should be verified for your specific system.
What is the NSN for 302815?
302815 is cataloged in the U.S. Government catalog under NSN 5330-00-110-5694. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 302815

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.