PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 302759
302759 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The ELECTRONIC COMPONENTS ASSEMBLY is a the manufacturer industrial component. Key specifications include material: ASBESTOS FRICTION LINING, actuation_method: HYDRAULIC CYLINDER INTERNAL, application_type: DRY, features_provided: FRICTION LINING, fabrication_method: MOLDED, surface_condition_and_location: BOTH SIDES GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-374-2047, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
302759
NSN: 5325-00-374-2047
FSC: 5325
CAGE: 1UVT5 — BRP US INC (USA)
SPECIFICATIONS
materialASBESTOS FRICTION LINING
actuation_methodHYDRAULIC CYLINDER INTERNAL
application_typeDRY
segment_quantity1
features_providedFRICTION LINING
fabrication_methodMOLDED
surface_condition_and_locationBOTH SIDES GROUND
NSN5325-00-374-2047
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 302759 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LARGE END HOLE DIAMETER: 0.688 INCHES NOMINAL IN
•
GROOVE WIDTH: 0.062 INCHES NOMINAL IN
•
LARGE FLANGE OUTSIDE DIAMETER: 1.188 INCHES NOMINAL IN
•
NONMETALLIC HARDNESS RATING: 55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A
•
FLANGE THICKNESS: 0.094 INCHES NOMINAL IN
•
GROOVE OUTSIDE DIAMETER: 0.938 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LARGE END HOLE DIAMETER0.688 INCHES NOMINAL IN
GROOVE WIDTH0.062 INCHES NOMINAL IN
OVERALL HEIGHT0.875 INCHES NOMINAL IN
LARGE FLANGE OUTSIDE DIAMETER1.188 INCHES NOMINAL IN
NONMETALLIC HARDNESS RATING55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A
FLANGE THICKNESS0.094 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER0.938 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SMALL FLANGE OUTSIDE DIAMETER0.562 INCHES NOMINAL IN
GROMMET STYLECONICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1131S6Interchangeable
interchangeable cross-reference
interchangeable
302759Interchangeable
interchangeable cross-reference
interchangeable
304020Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 302759?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 302759?
302759 is a ELECTRONIC COMPONENTS ASSEMBLY.
What parts can replace 302759?
There are 3 known substitutes for 302759: 1131S6, 302759, 304020. Substitute compatibility should be verified for your specific system.
What is the NSN for 302759?
302759 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-374-2047. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 302759

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026