PartsTable
Technical Data Sheet
Download PDF

30266 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
Lindy · TAPERED BEARING
PRODUCT OVERVIEW

30266: CONE AND ROLLERS,TAPERED ROLLER.

- UK Mains Plug to 2 x IEC C7 (Figure 8) sockets. - Saves on mains sockets. - 5A fuse fitted.

- Approved to BS 1363/A. - 100% electrical and mechanical inspection. - Fully moulded.

Key specifications include material: ALUMINUM ALLOY 2024 BARREL, cone_width: 0.8661 INCHES NOMINAL IN, head_style: HEXAGON, grip_length: 0.469 INCHES NOMINAL IN, head_height: 0.312 INCHES NOMINAL IN, corner_shape: ROUND OUTSIDE LEFT CORNER. This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-3586, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30266
NSN: 3110-00-100-3586
NIINs: 001003586, 002130841, 003745245, 006852523, 012116635, 013474845, 014179848, 015257033
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 BARREL
cone_width0.8661 INCHES NOMINAL IN
head_styleHEXAGON
grip_length0.469 INCHES NOMINAL IN
head_height0.312 INCHES NOMINAL IN
corner_shapeROUND OUTSIDE LEFT CORNER
flange_width0.5625 INCHES NOMINAL IN
thread_class2A A
bore_diameter2.5000 INCHES NOMINAL IN
overall_width2.980 INCHES IN
thread_length0.656 INCHES MINIMUM IN
cooling_methodAMBIENT AIR
NSN3110-00-100-3586
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30266 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0800 INCHES NOMINAL IN
•
CONE WIDTH: 0.8661 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0800 INCHES NOMINAL IN
CONE WIDTH0.8661 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
39250Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FFB187/01-454Reference document
Same NSN cross-reference
Reference document — Secondary reference
4255217-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
21071Reference document
Same NSN cross-reference
Reference document — Secondary reference
39250-20629Reference document
Same NSN cross-reference
Reference document — Secondary reference
4255217Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 30266?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30266?
30266 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Lindy.
What parts can replace 30266?
There are 6 known substitutes for 30266: 39250, FFB187/01-454, 4255217-4 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30266?
30266 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3586. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30266