PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 30265
30265 ✓ Verified by PartsTable
Lindy · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

<b>Features:</b><br><br>- UK Mains Plug (2m) to IEC C7 (Figure 8) and IEC C5 Cloverleaf sockets (0.5m)<br>- Saves on mains sockets<br>- 5A fuse fitted<br>- Approved to BS 1363/A<br>- 100% electrical and mechanical inspection<br>- Fully moulded This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0580, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30265
NSN: 3110-00-100-0580
FSC: 3110
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
materialCOPPER OVERALL
connection_typeTHREADED INTERNAL PIPE AND UNTHREADED EXTERNAL TUBE FIRST END
part_name_assigned_by_controlling_agency1/4 INCH X 3/8 INCH POHB X FE JLC FL SWVL IN
NSN3110-00-100-0580
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30265 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 4.1250 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0800 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.6250 INCHES NOMINAL IN
OUTSIDE DIAMETER4.1250 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0800 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
39250Interchangeable
interchangeable cross-reference
interchangeable
FFB187/01-454Interchangeable
interchangeable cross-reference
interchangeable
39250-39412Interchangeable
interchangeable cross-reference
interchangeable
AA59649-454Interchangeable
interchangeable cross-reference
interchangeable
21076Interchangeable
interchangeable cross-reference
interchangeable
M21076Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30265?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30265?
30265 is a CUP,TAPERED ROLLER BEARING manufactured by Lindy.
What parts can replace 30265?
There are 21 known substitutes for 30265: 39250, FFB187/01-454, 39250-39412 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30265?
30265 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30265

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026