PartsTable
Technical Data Sheet
Download PDF

30261-1 — SWEEPER,ROTARY,SELF-PROPELLED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

30261-1: SWEEPER,ROTARY,SELF-PROPELLED.

The SWEEPER,ROTARY,SELF-PROPELLED is a the manufacturer industrial component. Key specifications include special_features: CONTAINS NON-ASBESTOS MATERIAL, cross-sectional_thickness: 0.018 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-767-8005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30261-1
NSN: 5340-00-767-8005
NIINs: 007678005, 012541165, 014647000
FSC: 5340 — Hardware, Commercial
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
special_featuresCONTAINS NON-ASBESTOS MATERIAL
cross-sectional_thickness0.018 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5340-00-767-8005
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30261-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.784 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 1.080 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 1.000 INCHES NOMINAL IN
•
WIDTH: 0.390 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.602 INCHES NOMINAL IN
LENGTH0.784 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION1.080 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END1.000 INCHES NOMINAL IN
WIDTH0.390 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
204-060-628-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
204-060-628-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 30261-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30261-1?
30261-1 is a SWEEPER,ROTARY,SELF-PROPELLED.
What parts can replace 30261-1?
There are 2 known substitutes for 30261-1: 204-060-628-1, 204-060-628-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 30261-1?
30261-1 is cataloged in the U.S. Government catalog under NSN 5340-00-767-8005. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30261-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.