3024-548: GEAR,SPUR.
The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: PLAIN, SOLID, bore_style: INVOLUTE SPLINE BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 0.5625 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.
Government catalog under NSN 3020-00-108-8532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL OVERALL |
| body_style | PLAIN, SOLID |
| bore_style | INVOLUTE SPLINE BOTH ENDS |
| tooth_form | STANDARD |
| pitch_diameter | 0.5625 INCHES NOMINAL IN |
| pressure_angle | 20.0000 DEGREES |
| teeth_quantity | 18 |
| hardness_rating | 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL |
| spline_quantity | 12 BOTH ENDS |
| style_designator | PROTRUDING HUB |
| face_nominal_width | 0.287 INCHES IN |
| backlash_designation | GRADE B |
| NSN | 3020-00-108-8532 |
| NOMINAL DISTANCE FROM END TO SECOND GROOVE | 0.5700 INCHES FIRST END IN |
| BORE NOMINAL DIAMETER | 0.3490 INCHES BOTH ENDS IN |
| HUB NOMINAL DIAMETER | 0.5000 INCHES FIRST END IN |
| BACKLASH DESIGNATION | GRADE B |
| TEETH QUANTITY | 18 |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.620 INCHES FIRST END IN |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL |
No substitute or cross-reference records for this part.