PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 30234

30234 — Technical Data Sheet

✓ Verified by PartsTable
ICY BOX · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

IB-278U3 - External waterproof enclosure for 2.5" SATA HDD/SSD<br><b>Waterproof data safe</b><br>This external case for a 2.5" SATA hard disk or SSD (maximum 9.5 mm height) protects data against dust and splash water (IP-54 rating). For users who are outside quite often but who don’t want to be without their memory capacity, this case is a perfect solution! The modern USB 3.0 connection provides for a rapid data transfer between terminal and drive. Storage packages are transferred with a speed up to 5 Gbit/s.

Even the new chip set supports the speed of SATA III, otherwise the speed would get lost by the bottleneck.<br>- Plastic enclosure for 2.5" (6.35 cm) SATA HDDs/SSDs up to 9.5 mm high<br>- USB 3.0 up to 5 Gbit/s – backwards compatible to USB 2.0/1.1<br>- IP54 – splash waterproof and dust tight<br>- HotSwap and Plug & Play<br>- Quiet - Fanless<br><b>Water- and Dustproof</b><br>Outdoor approved, this little helper will keep your data as dry as a desert. Speaking of, dust has absolute This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-109-7842, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
30234
NSN: 5330-00-109-7842
FSC: 5330
CAGE: 27235 — HARDIE-TYNES CO., INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
load_rating2.000 POUNDS MINIMUM AND 4.800 POUNDS MAXIMUM LBS
coil_quantity21
overall_width1.000 INCHES NOMINAL IN
conductor_formSTRANDED LOCATION NOT OTHERWISE SPECIFIED
stock_diameter0.022 INCHES NOMINAL IN
inside_diameter0.066 INCHES NOMINAL IN
outside_diameter1.859 INCHES NOMINAL IN
special_featuresLOCKING BLOCK - G26-G27-G33-G39 - FITS CURRENT GEN3 / GEN4 MODELS (3 PINGUNS ONLY)
style_designatorCYLINDRICAL
termination_typeLUG TERMINAL W/MOUNTING HOLE BOTH ENDS SINGLE CONDUCTOR
NSN5330-00-109-7842
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30234 MFR: ICY BOX ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.562 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: COPPER ALLOY OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.859 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
APERTURE DIAMETER1.562 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
STYLE DESIGNATORCIRCULAR
MATERIALCOPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.859 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
AP10PInterchangeable
interchangeable cross-reference
interchangeable
749-1-10Interchangeable
interchangeable cross-reference
interchangeable
NE102836-0238Interchangeable
interchangeable cross-reference
interchangeable
U20A-100-238-MInterchangeable
interchangeable cross-reference
interchangeable
30-234-1Interchangeable
interchangeable cross-reference
interchangeable
U20A-100-263-MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30234?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30234?
30234 is a SPLICE SET,QUICK DISCONNECT manufactured by ICY BOX.
What parts can replace 30234?
There are 18 known substitutes for 30234: AP10P, 749-1-10, NE102836-0238 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30234?
30234 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-109-7842. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30234

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026