PartsTable
Technical Data Sheet
Download PDF

30218 — BEARING,ROLLER,TAPERED

✓ Government record, cited
Melissa & Doug · MRO · MRO_GENERAL
PRODUCT OVERVIEW

30218: BEARING,ROLLER,TAPERED.

Let imagination and wonder take flight! This colorful butterfly-shaped kite with a 50-inch wingspan is easy to assemble, launch and fly. Stitched, reinforced seams, heavy duty rip-stop fabric, and flexible fiberglass struts help the kite hold up to countless hours of flying time.

Eye-catching streaming tails add to the dramatic sight of this beautiful kite in the air! The kite comes with helpful flying and safety tips and 164 feet of strong, premium kite line on an easy-grip line holder for added control. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-8218, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30218
NSN: 3110-00-156-8218
NIINs: 001568218, 003711780, 012270708, 012714156, 012788335, 014196932, 016494680
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OVERALL
cup_width1.0236 INCHES NOMINAL IN
bore_shapeSTRAIGHT
cone_width1.1811 INCHES NOMINAL IN
bore_diameter3.5433 INCHES NOMINAL IN
contact_angle25.0 DEGREES MINIMUM
overall_width1.2795 INCHES NOMINAL IN
load_directionANGULAR
standout_width0.2561 INCHES NOMINAL IN
surface_finishGROUND
flange_diameter0.484 INCHES NOMINAL IN
hardness_rating58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
NSN3110-00-156-8218
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30218 · Melissa & Doug ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: OIL LUBRICATING
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 160.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
NONDEFINITIVE SPEC/STD DATA: 00 GRADE AND 13 TYPE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALOIL LUBRICATING
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH30.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER160.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
NONDEFINITIVE SPEC/STD DATA00 GRADE AND 13 TYPE
CONTACT ANGLE25.0 DEGREES MINIMUM
LOAD DIRECTIONANGULAR
SUBSTITUTES & CROSS-REFERENCES 3
7218Reference document
Same NSN cross-reference
Reference document — Secondary reference
72-6970-423Reference document
Same NSN cross-reference
Reference document — Secondary reference
129-622Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 30218?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30218?
30218 is a BEARING,ROLLER,TAPERED manufactured by Melissa & Doug. It is classified as a MRO (MRO_GENERAL).
What parts can replace 30218?
There are 3 known substitutes for 30218: 7218, 72-6970-423, 129-622. Substitute compatibility should be verified for your specific system.
What is the NSN for 30218?
30218 is cataloged in the U.S. Government catalog under NSN 3110-00-156-8218. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30218