The Gear,spur, cataloged under National Stock Number 3020-01-165-1539, is classified within Federal Supply Class 3020 (Gears, Pulleys, Sprockets, and Transmission Chain) of the Mechanical Power Transmission Equipment group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3020-01-165-1539 |
| Item Name | Gear,spur |
| FSC / FSG | 3020 / 30 — Gears, Pulleys, Sprockets, and Transmission Chain |
| Status | ACTIVE |
| Keyway Nominal Width | 0.189 INCHES BOTH ENDS IN |
| Bore Nominal Diameter | 0.189 INCHES BOTH ENDS IN |
| Hub Nominal Diameter | 1.120 INCHES FIRST END IN |
| Teeth Quantity | 12 |
| Body Style | PLAIN, SOLID |
| Bore Style | W/ KEYWAY BOTH ENDS |
| Mounting Hole Type and Quantity | 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| Nominal Distance Between Body Face and Protruding Hub End | 0.750 INCHES FIRST END IN |
| Hardness Rating | 48.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | PROTRUDING HUB |
| Material Document and Classification | MIL-S-5626,COMP 4140 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Pitch Diameter | 1.5000 INCHES NOMINAL IN |
| Tooth Form | STANDARD |
| Hub Style Designator | PLAIN FIRST END |
| Mounting Hole Nominal Thread Size | 0.250 INCHES TRANSVERSELY THROUGH HUB FIRST END IN |
| Nominal Outside Diameter | 1.750 INCHES IN |
| Mounting Hole Thread Quantity Per Inch | 28 TRANSVERSELY THROUGH HUB FIRST END |
| Nominal Distance From Bore Center to Keyway Bottom | 0.466 INCHES BOTH ENDS IN |
| Pressure Angle | 14.5000 DEGREES |
| Material | STEEL COMP 4140 OVERALL |
| Mounting Hole Thread Series Designator | UNF TRANSVERSELY THROUGH HUB FIRST END |
| Attachment Method | MOUNTING HOLE |
| Face Nominal Width | 1.250 INCHES IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 9669-1 | 3/9 Design control — primary reference Martin Sprocket and Gear Inc |
| 77C719669 | 7/2 Vendor item drawing reference Lockheed Martin Corporation Div Rms |
NSN 3020-01-165-1539 is a Gear,spur, classified under FSC 3020, Gears, Pulleys, Sprockets, and Transmission Chain. Status: active.
Key specifications for 3020-01-165-1539: Keyway Nominal Width: 0.189 INCHES BOTH ENDS IN; Bore Nominal Diameter: 0.189 INCHES BOTH ENDS IN; Hub Nominal Diameter: 1.120 INCHES FIRST END IN; Teeth Quantity: 12. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.