The Gear,spur, cataloged under National Stock Number 3020-00-916-7344, is classified within Federal Supply Class 3020 (Gears, Pulleys, Sprockets, and Transmission Chain) of the Mechanical Power Transmission Equipment group. Government technical data includes 30 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3020-00-916-7344 |
| Item Name | Gear,spur |
| FSC / FSG | 3020 / 30 — Gears, Pulleys, Sprockets, and Transmission Chain |
| Status | ACTIVE |
| Bore Nominal Diameter | 0.6640 INCHES BOTH ENDS IN |
| Teeth Quantity | 67 |
| Surface Treatment Document and Classification | MIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Body Style | PLAIN, SOLID |
| Bore Style | INVOLUTE SPLINE BOTH ENDS |
| Nominal Distance Between Body Face and Protruding Hub End | 0.6220 INCHES SECOND END IN |
| Nominal Distance Between Body Face and Protruding Hub End | 0.7480 INCHES FIRST END IN |
| First Step Nominal Length | 0.0600 INCHES FIRST END IN |
| First Step Nominal Length | 0.0600 INCHES SECOND END IN |
| Precision Classification | QUALITY NUMBER 9 |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | PROTRUDING HUBS |
| Material Document and Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Pitch Diameter | 4.1875 INCHES NOMINAL IN |
| Tooth Form | STANDARD |
| First Step Nominal Diameter | 1.2600 INCHES SECOND END IN |
| First Step Nominal Diameter | 1.3100 INCHES FIRST END IN |
| Hub Style Designator | 1 STEP FIRST END |
| Hub Style Designator | 1 STEP SECOND END |
| Spline Quantity | 12 BOTH ENDS |
| End Nominal Length | 0.5620 INCHES SECOND END IN |
| End Nominal Length | 0.6880 INCHES FIRST END IN |
| Nominal Outside Diameter | 4.3125 INCHES IN |
| Surface Treatment | OXIDE OVERALL |
| End Nominal Diameter | 0.9846 INCHES FIRST END IN |
| End Nominal Diameter | 0.9846 INCHES SECOND END IN |
| Pressure Angle | 20.0000 DEGREES |
| Material | STEEL COMP 4130 OVERALL |
| Spline Pitch Diameter | 0.6000 INCHES NOMINAL BOTH ENDS IN |
| Face Nominal Width | 0.750 INCHES IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 13538-1 | 3/9 Design control — primary reference Edo |
NSN 3020-00-916-7344 is a Gear,spur, classified under FSC 3020, Gears, Pulleys, Sprockets, and Transmission Chain. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5360-01-373-2953. Verify interchangeability with system specifications before substitution.
Key specifications for 3020-00-916-7344: Bore Nominal Diameter: 0.6640 INCHES BOTH ENDS IN; Teeth Quantity: 67; Surface Treatment Document and Classification: MIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Body Style: PLAIN, SOLID. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.