The Gear,spur, cataloged under National Stock Number 3020-00-904-3330, is classified within Federal Supply Class 3020 (Gears, Pulleys, Sprockets, and Transmission Chain) of the Mechanical Power Transmission Equipment group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3020-00-904-3330 |
| Item Name | Gear,spur |
| FSC / FSG | 3020 / 30 — Gears, Pulleys, Sprockets, and Transmission Chain |
| Status | ACTIVE |
| Bore Nominal Diameter | 0.909 INCHES BOTH ENDS IN |
| Teeth Quantity | 59 |
| Body Style | WEBBED, OFFSET, SOLID |
| Bore Style | INVOLUTE SPLINE BOTH ENDS |
| Nominal Distance Between Body Face and Protruding Hub End | 1.600 INCHES FIRST END IN |
| Hardness Rating | 21.0 ROCKWELL C MINIMUM AND 25.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | PROTRUDING HUB, RECESSED BODY |
| Material Document and Classification | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Pitch Diameter | 3.6875 INCHES NOMINAL IN |
| Tooth Form | STANDARD |
| Hub Style Designator | THREADED FIRST END |
| Spline Quantity | 16 BOTH ENDS |
| Nominal Outside Diameter | 3.811 INCHES IN |
| Pressure Angle | 20.0000 DEGREES |
| Material | STEEL OVERALL |
| Spline Pitch Diameter | 0.8000 INCHES NOMINAL BOTH ENDS IN |
| Body Recess Nominal Depth | 0.190 INCHES SECOND END IN |
| Face Nominal Width | 0.310 INCHES IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3-43288 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3020-00-904-3330 is a Gear,spur, classified under FSC 3020, Gears, Pulleys, Sprockets, and Transmission Chain. Status: active.
Key specifications for 3020-00-904-3330: Bore Nominal Diameter: 0.909 INCHES BOTH ENDS IN; Teeth Quantity: 59; Body Style: WEBBED, OFFSET, SOLID; Bore Style: INVOLUTE SPLINE BOTH ENDS. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.