The Gear,bevel, cataloged under National Stock Number 3020-00-107-1880, is classified within Federal Supply Class 3020 (No Item Name Available) of the Mechanical Power Transmission Equipment group. The primary manufacturer of record is Instrument Systems Corp. Government technical data includes 18 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3020-00-107-1880 |
| Primary Part Number | 6013-95 |
| Item Name | Gear,bevel |
| FSC / FSG | 3020 / 30 — No Item Name Available |
| Manufacturer | Instrument Systems Corp |
| Status | ACTIVE |
| Surface Treatment | PASSIVATE OVERALL |
| Nominal Overall Length | 0.187 INCHES IN |
| Style Designator | PERIPHERAL FACE, BACK HUB PROTRUDING |
| Pitch Angle | 45.0000 DEGREES |
| Pressure Angle | 20.0000 DEGREES |
| Material Document and Classification | QQ0S0763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Pitch Diameter | 0.2990 INCHES MINIMUM AND 0.3000 INCHES MAXIMUM IN |
| Hub Nominal Diameter | 0.144 INCHES SECOND END IN |
| Bore Style | PLAIN BOTH ENDS |
| Material | STEEL COMP 303 OVERALL |
| Nominal Outside Diameter | 0.318 INCHES IN |
| Body Recess Nominal Depth | 0.022 INCHES FIRST END IN |
| Bore Nominal Diameter | 0.125 INCHES BOTH ENDS IN |
| Hub Style Designator | PINNED SECOND END |
| Teeth Quantity | 24 |
| Face Nominal Width | 0.042 INCHES IN |
| Teeth Type | STRAIGHT |
| Body Style | PLAIN, SOLID |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 6013-95 PRIMARY | Instrument Systems Corp (USA) |
NSN 3020-00-107-1880 is a Gear,bevel, manufactured by Instrument Systems Corp, classified under FSC 3020 (No Item Name Available). Status: active.
NSN 3020-00-107-1880 has 1 cross-referenced part number: 6013-95 (Instrument Systems Corp).
There are 2 known substitutes for 3020-00-107-1880: 6685-00-849-2448, 2510-01-435-3016. Verify interchangeability with system specifications before substitution.
Key specifications for 6013-95: Surface Treatment: PASSIVATE OVERALL; Nominal Overall Length: 0.187 INCHES IN; Style Designator: PERIPHERAL FACE, BACK HUB PROTRUDING; Pitch Angle: 45.0000 DEGREES. 18 total characteristics are documented in the Federal Logistics Information System.