PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 302-1020P1
302-1020P1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.0000 INCHES NOMINAL IN, overall_width: 1.0000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE IN OUTER RACE,EXTRA CAPACITY OUTER RACE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-6022, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
302-1020P1
NSN: 3110-00-112-6022
FSC: 3110
CAGE: 94144 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.0000 INCHES NOMINAL IN
overall_width1.0000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE IN OUTER RACE,EXTRA CAPACITY OUTER RACE
style_designatorSEPARABLE INNER RACE, DRAWN SHELL
overall_outside_diameter1.5000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-112-6022
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 302-1020P1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 1.0000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
STYLE DESIGNATOR: SEPARABLE INNER RACE, DRAWN SHELL
•
MATERIAL: STEEL OVERALL
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
BORE DIAMETER1.0000 INCHES NOMINAL IN
SPECIAL FEATURESOIL HOLE IN OUTER RACE,EXTRA CAPACITY OUTER RACE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATORSEPARABLE INNER RACE, DRAWN SHELL
MATERIALSTEEL OVERALL
OVERALL WIDTH1.0000 INCHES NOMINAL IN
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER1.5000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
T227Interchangeable
interchangeable cross-reference
interchangeable
82218S41-344Interchangeable
interchangeable cross-reference
interchangeable
H291Interchangeable
interchangeable cross-reference
interchangeable
GGG-P-836Interchangeable
interchangeable cross-reference
interchangeable
5110-00-288-8737Interchangeable
interchangeable cross-reference
interchangeable
02408Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 302-1020P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 302-1020P1?
302-1020P1 is a BEARING,ROLLER,NEEDLE.
What parts can replace 302-1020P1?
There are 22 known substitutes for 302-1020P1: T227, 82218S41-344, H291 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 302-1020P1?
302-1020P1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-6022. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 302-1020P1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026