PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 302-1008P51ISSUE34
302-1008P51ISSUE34 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 17.00 MILLIMETERS NOMINAL MM, overall_width: 14.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-445-9999, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
302-1008P51ISSUE34
NSN: 3110-00-445-9999
FSC: 3110
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter17.00 MILLIMETERS NOMINAL MM
overall_width14.0 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter47.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-445-9999
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 302-1008P51ISSUE34 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 47.00 MILLIMETERS NOMINAL MM
•
RETAINER FABRICATION METHOD: PRESSED
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SEAL QUANTITY: 2
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER47.00 MILLIMETERS NOMINAL MM
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SEAL QUANTITY2
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE FINISHGROUND
LUBRICATION MATERIALGREASE
BEARING SEAL TYPECONTACT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
303FFInterchangeable
interchangeable cross-reference
interchangeable
77603X1CInterchangeable
interchangeable cross-reference
interchangeable
6303-2ZInterchangeable
interchangeable cross-reference
interchangeable
63032RSInterchangeable
interchangeable cross-reference
interchangeable
303-SZZInterchangeable
interchangeable cross-reference
interchangeable
303NPPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 302-1008P51ISSUE34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 302-1008P51ISSUE34?
302-1008P51ISSUE34 is a BEARING,BALL,ANNULAR.
What parts can replace 302-1008P51ISSUE34?
There are 13 known substitutes for 302-1008P51ISSUE34: 303FF, 77603X1C, 6303-2Z and 10 more. Substitute compatibility should be verified for your specific system.
Is 302-1008P51ISSUE34 still available?
302-1008P51ISSUE34 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 302-1008P51ISSUE34

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026