PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 30199
30199 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The TERMINAL,STUD is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, thickness: 0.060 INCHES NOMINAL IN, hole_diameter: 0.688 INCHES NOMINAL IN, overall_height: 0.281 INCHES IN, overall_length: 1.305 INCHES MINIMUM AND 1.315 INCHES MAXIMUM IN, inside_diameter: 0.680 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-9113, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30199
NSN: 5310-00-167-9113
FSC: 5310
CAGE: 27235 — HARDIE-TYNES CO., INC. (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
thickness0.060 INCHES NOMINAL IN
hole_diameter0.688 INCHES NOMINAL IN
overall_height0.281 INCHES IN
overall_length1.305 INCHES MINIMUM AND 1.315 INCHES MAXIMUM IN
inside_diameter0.680 INCHES NOMINAL IN
terminal_length0.187 INCHES IN
largest_diameter0.234 INCHES SINGLE END IN
outside_diameter0.747 INCHES NOMINAL IN
overall_diameter0.234 INCHES IN
basic_shape_styleTUBULAR, ROUND
surface_treatmentTIN OVERALL SINGLE LAYER
NSN5310-00-167-9113
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 30199 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
OVERALL DIAMETER: 1.500 INCHES NOMINAL IN
•
THICKNESS: 0.060 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.688 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
CENTER HOLE SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
OVERALL DIAMETER1.500 INCHES NOMINAL IN
THICKNESS0.060 INCHES NOMINAL IN
HOLE DIAMETER0.688 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
30876Interchangeable
310
interchangeable
30199Interchangeable
interchangeable cross-reference
interchangeable
24357Interchangeable
interchangeable cross-reference
interchangeable
L140934Interchangeable
interchangeable cross-reference
interchangeable
92497A400Interchangeable
interchangeable cross-reference
interchangeable
L140934-0810Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30199?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30199?
30199 is a TERMINAL,STUD.
What parts can replace 30199?
There are 15 known substitutes for 30199: 30876, 30199, 24357 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30199?
30199 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-9113. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30199

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026