PartsTable
Technical Data Sheet
PartsTable / MRO / 30196
30196 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUTOUT DISK,PROTECTIVE is a the manufacturer industrial component. Key specifications include length: 2.000 INCHES NOMINAL IN, material: STEEL COMP 631 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, cone_width: 1.2500 INCHES NOMINAL IN, load_rating: 68.000 POUNDS MINIMUM AND 76.000 POUNDS MAXIMUM LBS, corner_shape: SQUARE ALL CORNERS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3606, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30196
NSN: 3110-00-100-3606
FSC: 3110
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
length2.000 INCHES NOMINAL IN
materialSTEEL COMP 631 OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
cone_width1.2500 INCHES NOMINAL IN
load_rating68.000 POUNDS MINIMUM AND 76.000 POUNDS MAXIMUM LBS
corner_shapeSQUARE ALL CORNERS
bore_diameter1.7500 INCHES NOMINAL IN
coil_quantity13
overall_width7.000 INCHES NOMINAL IN
overall_height5.500 INCHES NOMINAL IN
overall_length16.000 INCHES NOMINAL IN
stock_diameter0.120 INCHES NOMINAL IN
NSN3110-00-100-3606
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30196 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.2500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.7500 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH1.2500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.7500 INCHES NOMINAL IN
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
SPECIAL FEATURESAXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE & CONE STABILITY POINT ON SHAFT AXIS 0.3100 IN. IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
437816-5Interchangeable
interchangeable cross-reference
interchangeable
16264Interchangeable
interchangeable cross-reference
interchangeable
16264ADXInterchangeable
interchangeable cross-reference
interchangeable
763-1666-001Interchangeable
interchangeable cross-reference
interchangeable
150-570GInterchangeable
interchangeable cross-reference
interchangeable
150-588PC196Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30196?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30196?
30196 is a CUTOUT DISK,PROTECTIVE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 30196?
There are 23 known substitutes for 30196: 437816-5, 16264, 16264ADX and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30196?
30196 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3606. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30196

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026