PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3018-501
3018-501 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, overall_width: 6.0 MILLIMETERS NOMINAL MM, overall_height: 41.0 MILLIMETERS NOMINAL MM, overall_length: 35.0 MILLIMETERS NOMINAL MM, end_item_identification: 7360-01-686-0248. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-703-2624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3018-501
NSN: 5340-01-703-2624
FSC: 5340
CAGE: 4JKJ9 — BERG MANUFACTURING, INC. (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
overall_width6.0 MILLIMETERS NOMINAL MM
overall_height41.0 MILLIMETERS NOMINAL MM
overall_length35.0 MILLIMETERS NOMINAL MM
end_item_identification7360-01-686-0248
NSN5340-01-703-2624
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3018-501 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYAMIDE NYLON
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT41.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH6.0 MILLIMETERS NOMINAL MM
MATERIALPLASTIC POLYAMIDE NYLON
END ITEM IDENTIFICATION7360-01-686-0248
OVERALL LENGTH35.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
ARP-200LInterchangeable
interchangeable cross-reference
interchangeable
PF200LInterchangeable
interchangeable cross-reference
interchangeable
2549Interchangeable
interchangeable cross-reference
interchangeable
CA-6093-01Interchangeable
interchangeable cross-reference
interchangeable
BH821Interchangeable
interchangeable cross-reference
interchangeable
CA103Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3018-501?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3018-501?
3018-501 is a BRACKET,MOUNTING.
What parts can replace 3018-501?
There are 6 known substitutes for 3018-501: ARP-200L, PF200L, 2549 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3018-501?
3018-501 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-703-2624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3018-501

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026