PartsTable
Technical Data Sheet
Download PDF

3017195 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3017195: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.466 INCHES MINIMUM AND 0.597 INCHES MAXIMUM IN, screw_material: COPPER ALLOY, fastener_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-235-0184, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3017195
NSN: 5305-00-235-0184
FSC: 5305 — Screws
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.466 INCHES MINIMUM AND 0.597 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
internal_drive_styleSLOT
nominal_thread_diameter0.250 INCHES IN
minimum_tensile_strength90000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch20
NSN5305-00-235-0184
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3017195 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.466 INCHES MINIMUM AND 0.597 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: COPPER ALLOY
•
MINIMUM TENSILE STRENGTH: 90000 POUNDS PER SQUARE INCH LBS
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD LENGTH0.466 INCHES MINIMUM AND 0.597 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALCOPPER ALLOY
MINIMUM TENSILE STRENGTH90000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
THREAD CLASS2A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
1683354Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3017195?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3017195?
3017195 is a SCREW,MACHINE.
What parts can replace 3017195?
There is 1 known substitute for 3017195: 1683354. Substitute compatibility should be verified for your specific system.
What is the NSN for 3017195?
3017195 is cataloged in the U.S. Government catalog under NSN 5305-00-235-0184. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3017195