PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3017154
3017154 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STUD,STEPPED is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, joint_style: VERTICAL JOINT, outside_diameter: 2.375 INCHES NOMINAL IN, fsc_application_data: TORPEDO TUBE, outer_edge_thickness: 0.180 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-710-0135, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3017154
NSN: 5330-00-710-0135
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
joint_styleVERTICAL JOINT
outside_diameter2.375 INCHES NOMINAL IN
fsc_application_dataTORPEDO TUBE
outer_edge_thickness0.180 INCHES NOMINAL IN
material_document_and_classificationUNABLE TO DECODE
NSN5330-00-710-0135
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3017154 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER EDGE THICKNESS: 0.180 INCHES NOMINAL IN
•
JOINT STYLE: VERTICAL JOINT
•
OUTSIDE DIAMETER: 2.375 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
FSC APPLICATION DATA: TORPEDO TUBE
•
RING STYLE: CONCENTRIC
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS (FLIS)
OUTER EDGE THICKNESS0.180 INCHES NOMINAL IN
JOINT STYLEVERTICAL JOINT
OUTSIDE DIAMETER2.375 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
FSC APPLICATION DATATORPEDO TUBE
RING STYLECONCENTRIC
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
SM-C-619495Interchangeable
interchangeable cross-reference
interchangeable
11093Interchangeable
interchangeable cross-reference
interchangeable
SMC619495-1Interchangeable
interchangeable cross-reference
interchangeable
3017154Interchangeable
interchangeable cross-reference
interchangeable
1683123Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3017154?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3017154?
3017154 is a STUD,STEPPED.
What parts can replace 3017154?
There are 5 known substitutes for 3017154: SM-C-619495, 11093, SMC619495-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3017154?
3017154 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-710-0135. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3017154

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026