PartsTable
Technical Data Sheet
Download PDF

3016M78P03 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3016M78P03: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, overall_length: 0.737 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN, style_designator: CURVED ARCH. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-182-5362, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3016M78P03
NSN: 5340-00-182-5362
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
overall_length0.737 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN
style_designatorCURVED ARCH
material_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
mounting_hole_size0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
inside_diameter/arch_length0.202 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN
distance_between_base_and_inside_of_arch0.129 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
center_to_center_distance_between_arch_and_mounting_hole0.423 INCHES NOMINAL IN
NSN5340-00-182-5362
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3016M78P03 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL THICKNESS: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
CUSHION: NOT INCLUDED
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.129 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORCURVED ARCH
OVERALL LENGTH0.737 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN
OVERALL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
CUSHIONNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.129 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
MATERIALSTEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE0.423 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340PL0718093Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3016M78P03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3016M78P03?
3016M78P03 is a STRAP,RETAINING.
What parts can replace 3016M78P03?
There is 1 known substitute for 3016M78P03: 5340PL0718093. Substitute compatibility should be verified for your specific system.
What is the NSN for 3016M78P03?
3016M78P03 is cataloged in the U.S. Government catalog under NSN 5340-00-182-5362. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3016M78P03

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.