PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3016906
3016906 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, prong_length: 1.188 INCHES NOMINAL IN, opening_width: 0.620 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN, style_designator: LOCK, wire_stock_diameter: 0.063 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, material_document_and_classification: QQ-W-423 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-146-9799, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3016906
NSN: 5315-01-146-9799
FSC: 5315
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
prong_length1.188 INCHES NOMINAL IN
opening_width0.620 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN
style_designatorLOCK
wire_stock_diameter0.063 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
material_document_and_classificationQQ-W-423 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-01-146-9799
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3016906 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING WIDTH: 0.620 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN
•
WIRE STOCK DIAMETER: 0.063 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 304 OVERALL
•
PRONG LENGTH: 1.188 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LOCK
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OPENING WIDTH0.620 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN
WIRE STOCK DIAMETER0.063 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
MATERIALSTEEL COMP 304 OVERALL
PRONG LENGTH1.188 INCHES NOMINAL IN
STYLE DESIGNATORLOCK
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
0P120Interchangeable
interchangeable cross-reference
interchangeable
H27905A29Interchangeable
interchangeable cross-reference
interchangeable
107154PC20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3016906?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3016906?
3016906 is a PIN,LOCK.
What parts can replace 3016906?
There are 3 known substitutes for 3016906: 0P120, H27905A29, 107154PC20. Substitute compatibility should be verified for your specific system.
What is the NSN for 3016906?
3016906 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-146-9799. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3016906

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026