PartsTable
Technical Data Sheet
Download PDF

3014563 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3014563: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN, center_hole_diameter: 0.795 INCHES MINIMUM AND 0.807 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-248-3849, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3014563
NSN: 5331-00-248-3849
FSC: 5331 — O-ring
CAGE: 001JK — EMBRAER S.A. (BRA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN
center_hole_diameter0.795 INCHES MINIMUM AND 0.807 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-248-3849
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3014563 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.795 INCHES MINIMUM AND 0.807 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.795 INCHES MINIMUM AND 0.807 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 5
MS29513-019Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
212-558-019Reference document
Same NSN cross-reference
Reference document — Secondary reference
ARP568-019-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
7866-19Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2661058B019Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 3014563?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3014563?
3014563 is a O-RING.
What parts can replace 3014563?
There are 5 known substitutes for 3014563: MS29513-019, 212-558-019, ARP568-019-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3014563?
3014563 is cataloged in the U.S. Government catalog under NSN 5331-00-248-3849. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3014563