PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3013939-8-8-8-12.00-000
3013939-8-8-8-12.00-000 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The 3013939-8-8-8-12.00-000 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-354-0343, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3013939-8-8-8-12.00-000
NSN: 4720-01-354-0343
FSC: 4720
CAGE: 87373 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HOSE PRODUCTS DIVISION (USA)
SPECIFICATIONS
Part Number3013939-8-8-8-12.00-000
NSN4720-01-354-0343
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 3013939-8-8-8-12.00-000 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
•
MEASURING METHOD AND LENGTH: 12.000 INCHES NOMINAL OVERALL IN
•
HYDROSTATIC TEST PRESSURE: 7000.0 POUNDS PER SQUARE INCH LBS
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
MINIMUM INSIDE BENDING RADIUS: 7.000 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
BURST TEST PRESSURE: 14000.0 POUNDS PER SQUARE INCH LBS
•
END CONNECTION DESIGN: ELBOW FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
MEASURING METHOD AND LENGTH12.000 INCHES NOMINAL OVERALL IN
HYDROSTATIC TEST PRESSURE7000.0 POUNDS PER SQUARE INCH LBS
SEAT ANGLE37.0 DEGREES FIRST END
MINIMUM INSIDE BENDING RADIUS7.000 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
BURST TEST PRESSURE14000.0 POUNDS PER SQUARE INCH LBS
END CONNECTION DESIGNELBOW FIRST END
OPERATING PRESSURE3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
NOMINAL THREAD SIZE0.750 INCHES FIRST END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
13-888Interchangeable
interchangeable cross-reference
interchangeable
88576Interchangeable
interchangeable cross-reference
interchangeable
126085-001Interchangeable
interchangeable cross-reference
interchangeable
SCC22151Interchangeable
interchangeable cross-reference
interchangeable
13188Interchangeable
interchangeable cross-reference
interchangeable
13265Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3013939-8-8-8-12.00-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3013939-8-8-8-12.00-000?
3013939-8-8-8-12.00-000 is a 3013939-8-8-8-12.00-000.
What parts can replace 3013939-8-8-8-12.00-000?
There are 16 known substitutes for 3013939-8-8-8-12.00-000: 13-888, 88576, 126085-001 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3013939-8-8-8-12.00-000?
3013939-8-8-8-12.00-000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-354-0343. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3013939-8-8-8-12.00-000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026