PartsTable
Technical Data Sheet
3013836 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PULLEY ASSEMBLY,FAN is a the manufacturer thermal management component critical for maintaining optimal operating temperatures in enterprise hardware. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.485 INCHES MINIMUM AND 1.523 INCHES MAXIMUM IN, center_hole_diameter: 1.358 INCHES MINIMUM AND 1.370 INCHES MAXIMUM IN, elongation_percentage: 276 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-514-6060, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3013836
NSN: 5331-00-514-6060
FSC: 5331 — O-RING
CAGE: FB459 — EMBRAER AVIATION INTERNATIONAL (FRA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.485 INCHES MINIMUM AND 1.523 INCHES MAXIMUM IN
center_hole_diameter1.358 INCHES MINIMUM AND 1.370 INCHES MAXIMUM IN
elongation_percentage276 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-514-6060
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3013836 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
OUTSIDE DIAMETER: 1.485 INCHES MINIMUM AND 1.523 INCHES MAXIMUM IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER: 1.358 INCHES MINIMUM AND 1.370 INCHES MAXIMUM IN
ELONGATION PERCENTAGE: 276 MAXIMUM
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Server thermal management and cooling
  • Hot-swap fan replacement in production environments
  • Redundant cooling for high-availability systems
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.485 INCHES MINIMUM AND 1.523 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER1.358 INCHES MINIMUM AND 1.370 INCHES MAXIMUM IN
ELONGATION PERCENTAGE276 MAXIMUM
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
457-6028Interchangeable
interchangeable cross-reference
interchangeable
U5F7723312Interchangeable
interchangeable cross-reference
interchangeable
723HMInterchangeable
interchangeable cross-reference
interchangeable
MS29513-028Interchangeable
interchangeable cross-reference
interchangeable
874452-00Interchangeable
interchangeable cross-reference
interchangeable
169183Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3013836?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3013836?
3013836 is a PULLEY ASSEMBLY,FAN.
What parts can replace 3013836?
There are 19 known substitutes for 3013836: 457-6028, U5F7723312, 723HM and 16 more. Substitute compatibility should be verified for your specific system.
Is 3013836 still available?
3013836 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3013836