PartsTable
Technical Data Sheet
Download PDF

3013165 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3013165: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN, diameter: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, material: STEEL COMP 431 OVERALL, head_style: FLAT, chamfer_length: 0.050 INCHES NOMINAL IN, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-103-0692, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3013165
NSN: 5315-00-103-0692
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
height0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
diameter0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
materialSTEEL COMP 431 OVERALL
head_styleFLAT
chamfer_length0.050 INCHES NOMINAL IN
hardness_rating30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
pin_head_diameter0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
under_head_length0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
first_hole_diameter0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-103-0692
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3013165 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.050 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
FIRST HOLE DIAMETER: 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.050 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
PIN CHAMFER ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
FIRST HOLE DIAMETER0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5628,COMP 51431 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3013165?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3013165?
3013165 is a PIN,STRAIGHT,HEADED.
What is the NSN for 3013165?
3013165 is cataloged in the U.S. Government catalog under NSN 5315-00-103-0692. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3013165

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.