PartsTable
Technical Data Sheet
Download PDF

3012419 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3012419: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OVERALL, end_radius: 0.234 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, fork_depth: 0.485 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.189 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, overall_width: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-757-5071, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3012419
NSN: 5340-00-757-5071
FSC: 5340 — Hardware, Commercial
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
end_radius0.234 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
fork_depth0.485 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
thread_class3B ROD CONNECTION
hole_diameter0.189 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
overall_width0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
thread_length0.375 INCHES NOMINAL ROD CONNECTION IN
overall_height0.423 INCHES NOMINAL IN
fork_span_width0.181 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
fork_arm_thickness0.115 INCHES MINIMUM IN
NSN5340-00-757-5071
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3012419 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.181 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.115 INCHES MINIMUM IN
•
END RADIUS: 0.234 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.375 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.423 INCHES NOMINAL IN
FORK SPAN WIDTH0.181 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
FORK ARM THICKNESS0.115 INCHES MINIMUM IN
END RADIUS0.234 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
THREAD LENGTH0.375 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340007575071Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3012419?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3012419?
3012419 is a CLEVIS,ROD END.
What parts can replace 3012419?
There is 1 known substitute for 3012419: 5340007575071. Substitute compatibility should be verified for your specific system.
What is the NSN for 3012419?
3012419 is cataloged in the U.S. Government catalog under NSN 5340-00-757-5071. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3012419

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.