PartsTable
Technical Data Sheet
Download PDF

3011740 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3011740: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.043 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.145 INCHES MINIMUM IN, screw_material: STEEL COMP 8740. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-757-4456, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3011740
NSN: 5305-00-757-4456
FSC: 5305 — Screws
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.043 INCHES NOMINAL IN
thread_class2A A
head_diameter0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.145 INCHES MINIMUM IN
screw_materialSTEEL COMP 8740
fastener_length0.188 INCHES NOMINAL IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle81.0 DEGREES NOMINAL
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
NSN5305-00-757-4456
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3011740 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.043 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.188 INCHES NOMINAL IN
•
THREAD LENGTH: 0.145 INCHES MINIMUM IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.043 INCHES NOMINAL IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.188 INCHES NOMINAL IN
THREAD LENGTH0.145 INCHES MINIMUM IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 8740
INTERNAL DRIVE STYLESLOT
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3011740?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3011740?
3011740 is a SCREW,MACHINE.
What is the NSN for 3011740?
3011740 is cataloged in the U.S. Government catalog under NSN 5305-00-757-4456. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3011740