PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3011651
3011651 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, overall_height: 0.6220 INCHES MINIMUM AND 0.6280 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, bore_smallest_diameter: 1.0000 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3505, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3011651
NSN: 3110-00-227-3505
FSC: 3110
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
overall_height0.6220 INCHES MINIMUM AND 0.6280 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter1.0000 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN
overall_outside_diameter2.1790 INCHES MINIMUM AND 2.1870 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
thrust_directional_capability_designationSINGLE
NSN3110-00-227-3505
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3011651 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 2.1790 INCHES MINIMUM AND 2.1870 INCHES MAXIMUM IN
•
RETAINER FABRICATION METHOD: MACHINED
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
BORE SMALLEST DIAMETER: 1.0000 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.6220 INCHES MINIMUM AND 0.6280 INCHES MAXIMUM IN
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER2.1790 INCHES MINIMUM AND 2.1870 INCHES MAXIMUM IN
RETAINER FABRICATION METHODMACHINED
MATERIALSTEEL OVERALL
STYLE DESIGNATORGROOVED RACE SURFACE
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
BORE SMALLEST DIAMETER1.0000 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
9777Interchangeable
interchangeable cross-reference
interchangeable
9779Interchangeable
interchangeable cross-reference
interchangeable
986149-1BInterchangeable
interchangeable cross-reference
interchangeable
3628973Interchangeable
interchangeable cross-reference
interchangeable
3011651Interchangeable
interchangeable cross-reference
interchangeable
362897300Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3011651?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3011651?
3011651 is a BEARING,BALL,THRUST.
What parts can replace 3011651?
There are 10 known substitutes for 3011651: 9777, 9779, 986149-1B and 7 more. Substitute compatibility should be verified for your specific system.
Is 3011651 still available?
3011651 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3011651

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026