PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3011528
3011528 ✓ Verified by PartsTable
Zebra · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Gloss polyester facestock that provides unparalleled smear and scratch resistance, resistance to moderate chemicals and up to 3 years outdoors. Available in thermal transfer in white, silver and clear. Offering includes standards, high-tack and removable adhesives.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-841-0771, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3011528
NSN: 5330-00-841-0771
FSC: 5330
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
peripheral_diameter2.984 INCHES MINIMUM AND 3.014 INCHES MAXIMUM IN
center_hole_diameter2.878 INCHES MINIMUM AND 2.908 INCHES MAXIMUM IN
cross-sectional_height0.042 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
cross-sectional_shape_styleV
material_document_and_classificationAMS 7279 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-841-0771
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3011528 MFR: Zebra ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: V
•
CENTER HOLE DIAMETER: 2.878 INCHES MINIMUM AND 2.908 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
•
PERIPHERAL DIAMETER: 2.984 INCHES MINIMUM AND 3.014 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.042 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7279 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEV
CENTER HOLE DIAMETER2.878 INCHES MINIMUM AND 2.908 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
PERIPHERAL DIAMETER2.984 INCHES MINIMUM AND 3.014 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.042 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 7279 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
91294A356Interchangeable
interchangeable cross-reference
interchangeable
12759-00385Interchangeable
interchangeable cross-reference
interchangeable
3006002Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3011528?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3011528?
3011528 is a RETAINER,PACKING manufactured by Zebra.
What parts can replace 3011528?
There are 3 known substitutes for 3011528: 91294A356, 12759-00385, 3006002. Substitute compatibility should be verified for your specific system.
What is the NSN for 3011528?
3011528 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-841-0771. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3011528

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026