PartsTable
Technical Data Sheet
Download PDF

3011511 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

3011511: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: ASBESTOS OR ALUMINUM OVERALL, hole_diameter: 0.216 INCHES MINIMUM AND 0.236 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.620 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 0.505 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN, bolt_circle_diameter: 1.120 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-757-4092, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3011511
NSN: 5330-00-757-4092
NIINs: 007574092, 015234655
FSC: 5330 — Packing and Gasket Materials
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialASBESTOS OR ALUMINUM OVERALL
hole_diameter0.216 INCHES MINIMUM AND 0.236 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.620 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter0.505 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
bolt_hole_quantity2
bolt_circle_diameter1.120 INCHES NOMINAL IN
outside_corner_radius0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
end_item_identificationCPU ACTUATOR
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleFIBER METAL FOIL
side_radius_from_gasket_center0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
NSN5330-00-757-4092
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3011511 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: FIBER METAL FOIL
•
APERTURE DIAMETER: 0.505 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 2
•
BOLT CIRCLE DIAMETER: 1.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
CROSS-SECTIONAL SHAPE STYLEFIBER METAL FOIL
OVERALL WIDTH1.620 INCHES NOMINAL IN
APERTURE DIAMETER0.505 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER1.120 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
MATERIALASBESTOS OR ALUMINUM OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3011511?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3011511?
3011511 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 3011511?
3011511 is cataloged in the U.S. Government catalog under NSN 5330-00-757-4092. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3011511

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.