PartsTable
Technical Data Sheet
Download PDF

3011497 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3011497: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 11.8 MILLIMETERS NOMINAL MM, thread_length: 18.0 MILLIMETERS NOMINAL MM, fastener_length: 30.0 MILLIMETERS NOMINAL MM, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-600-3105, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3011497
NSN: 5305-01-600-3105
FSC: 5305 — Screws
CAGE: 1EFH8 — GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. DBA GDLS DIV GDLS-FP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_diameter11.8 MILLIMETERS NOMINAL MM
thread_length18.0 MILLIMETERS NOMINAL MM
fastener_length30.0 MILLIMETERS NOMINAL MM
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL
surface_treatmentOXIDE OVERALL
width_across_flats4.1 MILLIMETERS NOMINAL MM
internal_drive_styleHEXAGON
end_item_identificationMASTIFF 3
nominal_thread_diameter6.0 MILLIMETERS MM
NSN5305-01-600-3105
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3011497 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 4.1 MILLIMETERS NOMINAL MM
•
EXTERNAL THREAD TOLERANCE CLASS: 6G G
•
FASTENER LENGTH: 30.0 MILLIMETERS NOMINAL MM
•
THREAD PITCH IN MILLIMETERS: 1.0
•
THREAD LENGTH: 18.0 MILLIMETERS NOMINAL MM
•
NOMINAL THREAD DIAMETER: 6.0 MILLIMETERS MM
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS4.1 MILLIMETERS NOMINAL MM
EXTERNAL THREAD TOLERANCE CLASS6G G
FASTENER LENGTH30.0 MILLIMETERS NOMINAL MM
THREAD PITCH IN MILLIMETERS1.0
THREAD LENGTH18.0 MILLIMETERS NOMINAL MM
NOMINAL THREAD DIAMETER6.0 MILLIMETERS MM
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
COLORBLACK OVERALL
SURFACE TREATMENTOXIDE OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
12759-01309Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3011497?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3011497?
3011497 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 3011497?
There is 1 known substitute for 3011497: 12759-01309. Substitute compatibility should be verified for your specific system.
What is the NSN for 3011497?
3011497 is cataloged in the U.S. Government catalog under NSN 5305-01-600-3105. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3011497

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.