PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3011436
3011436 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC AND ASBESTOS OVERALL, hole_diameter: 0.221 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 4.870 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 4.020 INCHES NOMINAL IN, bolt_circle_diameter: 4.420 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-811-0936, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3011436
NSN: 5330-00-811-0936
FSC: 5330
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialRUBBER SYNTHETIC AND ASBESTOS OVERALL
hole_diameter0.221 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter4.870 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter4.020 INCHES NOMINAL IN
bolt_hole_quantity8
bolt_circle_diameter4.420 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-811-0936
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3011436 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.221 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: RUBBER SYNTHETIC AND ASBESTOS OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
BOLT CIRCLE DIAMETER: 4.420 INCHES NOMINAL IN
•
APERTURE DIAMETER: 4.020 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 8
•
OUTSIDE DIAMETER: 4.870 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
HOLE DIAMETER0.221 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALRUBBER SYNTHETIC AND ASBESTOS OVERALL
STYLE DESIGNATORCIRCULAR
BOLT CIRCLE DIAMETER4.420 INCHES NOMINAL IN
APERTURE DIAMETER4.020 INCHES NOMINAL IN
BOLT HOLE QUANTITY8
OUTSIDE DIAMETER4.870 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
12759-00159Interchangeable
interchangeable cross-reference
interchangeable
3011436Interchangeable
interchangeable cross-reference
interchangeable
AEW24X75WA50BD8A81Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3011436?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3011436?
3011436 is a GASKET.
What parts can replace 3011436?
There are 3 known substitutes for 3011436: 12759-00159, 3011436, AEW24X75WA50BD8A81. Substitute compatibility should be verified for your specific system.
What is the NSN for 3011436?
3011436 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-811-0936. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3011436

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026