PartsTable
Technical Data Sheet
Download PDF

3011094 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3011094: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.310 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN, material: STEEL COMP 410 OVERALL, overall_length: 2.650 INCHES MINIMUM AND 2.710 INCHES MAXIMUM IN, undercut_width: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, first_end_style: CHAMFERED, hardness_rating: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-842-6437, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3011094
NSN: 5315-00-842-6437
NIINs: 008426437, 015570908
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
diameter0.310 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
materialSTEEL COMP 410 OVERALL
overall_length2.650 INCHES MINIMUM AND 2.710 INCHES MAXIMUM IN
undercut_width0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
first_end_styleCHAMFERED
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleCHAMFERED
undercut_diameter0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
first_end_locationBOTH ENDS
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
second_end_taper_length0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
NSN5315-00-842-6437
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3011094 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.310 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLECHAMFERED
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.310 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
OVERALL LENGTH2.650 INCHES MINIMUM AND 2.710 INCHES MAXIMUM IN
SECOND END TAPER LENGTH0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 3011094?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3011094?
3011094 is a PIN,GROOVED,HEADLESS.
What is the NSN for 3011094?
3011094 is cataloged in the U.S. Government catalog under NSN 5315-00-842-6437. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3011094

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.