3010P1-503 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

3010P1-503: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES/SLOTS, body_width: 0.280 INCHES NOMINAL IN, body_height: 0.312 INCHES NOMINAL IN, body_length: 1.250 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, bearing_type: BEARING SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-088-3550, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 3010P1-503

NSN: 5905-00-088-3550
NIINs: 000883550, 002578099, 006821325, 009657653
FSC: 5905 — Resistor
CAGE: 80294 — BOURNS INSTRUMENTS INC (USA)

SPECIFICATIONS

body_style	RECTANGULAR W/MOUNTING HOLES/SLOTS
body_width	0.280 INCHES NOMINAL IN
body_height	0.312 INCHES NOMINAL IN
body_length	1.250 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
bearing_type	BEARING SHAFT
shaft_length	0.063 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
overall_width	0.280 INCHES NOMINAL IN
overall_height	0.812 INCHES NOMINAL IN
overall_length	1.312 INCHES NOMINAL IN
shaft_diameter	0.125 INCHES NOMINAL IN
NSN	5905-00-088-3550

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 0.20 INCH-OUNCES IN

•

ELECTRICAL RESISTANCE PER SECTION: 50.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 175.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

MOUNTING FACILITY QUANTITY: 2

•

SHAFT DIAMETER: 0.125 INCHES NOMINAL IN

•

BODY STYLE: RECTANGULAR W/MOUNTING HOLES/SLOTS

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	0.20 INCH-OUNCES IN
OVERALL HEIGHT	0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
ELECTRICAL RESISTANCE PER SECTION	50.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	175.0 SINGLE SECTION
SECTION QUANTITY	1
MOUNTING FACILITY QUANTITY	2
SHAFT DIAMETER	0.125 INCHES NOMINAL IN
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
TERMINAL LENGTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MOUNTING METHOD	UNTHREADED HOLE(S)

SUBSTITUTES & CROSS-REFERENCES 4

92C847-016Reference document

Same NSN cross-reference

Reference document — Secondary reference

335C779H12Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

335C779H12REVESame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

1591-50KSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 3010P1-503?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3010P1-503?

3010P1-503 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace 3010P1-503?

There are 4 known substitutes for 3010P1-503: 92C847-016, 335C779H12, 335C779H12REVE and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 3010P1-503?

3010P1-503 is cataloged in the U.S. Government catalog under NSN 5905-00-088-3550. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3010P1-503 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — 3010P1-503