PartsTable
Technical Data Sheet
Download PDF

3010609 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3010609: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 1.340 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN, length: 2.000 INCHES MINIMUM AND 2.080 INCHES MAXIMUM IN, material: STEEL, body_radius: 0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN, corner_radius: 0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN, hole_diameter: 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-857-3283, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3010609
NSN: 5340-00-857-3283
NIINs: 008573283, 016013387
FSC: 5340 — Hardware, Commercial
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
width1.340 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
length2.000 INCHES MINIMUM AND 2.080 INCHES MAXIMUM IN
materialSTEEL
body_radius0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
corner_radius0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
hole_diameter0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
body_thickness0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
securing_device_typeTHREADED FASTENER
peripheral_shape_styleDIAMOND, ROUNDED CORNERS, TWO HOLES
cross-sectional_shape_styleFLAT W/OPEN CENTER
mounting_opening_shape_styleUNTHREADED HOLE
distance_between_holes_along_length1.600 INCHES NOMINAL IN
NSN5340-00-857-3283
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3010609 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER RADIUS: 0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
•
LENGTH: 2.000 INCHES MINIMUM AND 2.080 INCHES MAXIMUM IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 1.600 INCHES NOMINAL IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5510 ASSN STD SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL SHAPE STYLE: FLAT W/OPEN CENTER
•
SECURING DEVICE TYPE: THREADED FASTENER
•
BODY RADIUS: 0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CORNER RADIUS0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
LENGTH2.000 INCHES MINIMUM AND 2.080 INCHES MAXIMUM IN
DISTANCE BETWEEN HOLES ALONG LENGTH1.600 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5510 ASSN STD SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLEFLAT W/OPEN CENTER
SECURING DEVICE TYPETHREADED FASTENER
BODY RADIUS0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEDIAMOND, ROUNDED CORNERS, TWO HOLES
WIDTH1.340 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 3010609?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3010609?
3010609 is a COVER,ACCESS.
What is the NSN for 3010609?
3010609 is cataloged in the U.S. Government catalog under NSN 5340-00-857-3283. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3010609

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.