PartsTable / COMPONENT / 3010462
3010462
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.224 INCHES NOMINAL IN, overall_length: 4.224 INCHES NOMINAL IN, aperture_diameter: 3.344 INCHES NOMINAL IN, fsc_application_data: CONTROLS,QUADRANT,ENGINE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-237-5653, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
3010462
NSN: 5330-00-237-5653 FSC: 5330 CAGE: 001JK — EMBRAER S.A. (BRA)
SPECIFICATIONS
material ASBESTOS AND RUBBER SYNTHETIC OVERALL hole_diameter 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 4.224 INCHES NOMINAL IN overall_length 4.224 INCHES NOMINAL IN aperture_diameter 3.344 INCHES NOMINAL IN fsc_application_data CONTROLS,QUADRANT,ENGINE outside_corner_radius 0.344 INCHES NOMINAL IN cross-sectional_thickness 0.014 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION material_document_and_classification AMS 3232 FED SPEC ALL MATERIAL RESPONSES OVERALL center_to_center_distance_between_bolt_holes_along_width 3.536 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN center_to_center_distance_between_bolt_holes_along_length 3.536 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN NSN 5330-00-237-5653
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 3010462
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• FSC APPLICATION DATA: CONTROLS,QUADRANT,ENGINE
• CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 3.536 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 FED SPEC ALL MATERIAL RESPONSES OVERALL
• MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
• CROSS-SECTIONAL THICKNESS: 0.014 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
• CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.536 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION FSC APPLICATION DATA CONTROLS,QUADRANT,ENGINE OVERALL WIDTH 4.224 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH 3.536 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN MATERIAL DOCUMENT AND CLASSIFICATION AMS 3232 FED SPEC ALL MATERIAL RESPONSES OVERALL MATERIAL ASBESTOS AND RUBBER SYNTHETIC OVERALL CROSS-SECTIONAL THICKNESS 0.014 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 3.536 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN HOLE DIAMETER 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN APERTURE DIAMETER 3.344 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
20745 Interchangeable interchangeable cross-reference
interchangeable
22928 Interchangeable interchangeable cross-reference
interchangeable
SA22928 Interchangeable interchangeable cross-reference
interchangeable
LS15235C3-2 Interchangeable interchangeable cross-reference
interchangeable
55-80377 Interchangeable interchangeable cross-reference
interchangeable
DPX20745 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 3010462?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3010462?
3010462 is a GASKET.
What parts can replace 3010462?
There are 15 known substitutes for 3010462: 20745, 22928, SA22928 and 12 more. Substitute compatibility should be verified for your specific system.
Is 3010462 still available?
3010462 is currently cancelled.
Request a Quote — 3010462