PartsTable
Technical Data Sheet
Download PDF

30102 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
Melissa & Doug · TAPERED BEARING
PRODUCT OVERVIEW

30102: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include document_type: CATALOG SHEET, film_thickness: 0.0002 INCHES MINIMUM AND 0.0005 INCHES MAXIMUM IN, document_source: 4KTR3, application_type: COLD, features_provided: AEROSOL CAN, component_quantity: 10. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0668, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30102
NSN: 3110-00-100-0668
NIINs: 001000668, 001108792, 001564831, 001966695, 002039000, 002252415, 002394404, 005541803, 006748100, 008684994, 011989382, 012272534, 012814398, 013676005, 016422396, 016586889
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
document_typeCATALOG SHEET
film_thickness0.0002 INCHES MINIMUM AND 0.0005 INCHES MAXIMUM IN
document_source4KTR3
application_typeCOLD
special_featuresSOFT FILM WITH MILDEW INHIBITOR;SELF PRESSURIZED SPRAY CONTAINER;CARBON DIOXIDE PROPELLANT;INTENDED FOR USE ON MOVING PARTS THAT REQUIRE CORROSION RESISTANCE AND MILDEW INHIBITION
features_providedAEROSOL CAN
component_quantity10
package_model_number30-102
component_document_originINDUSTRIAL
film_hardness_designationSOFT
nondefinitive_spec/std_dataC TYPE AND 2 CLASS AND CO2 GRADE
specification/standard_data81349-MIL-PRF-81309G GOVERNMENT SPECIFICATION G
NSN3110-00-100-0668
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30102 · Melissa & Doug ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.6250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 3.0000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.6250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER3.0000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
173067Reference document
Same NSN cross-reference
Reference document — Secondary reference
K659Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
659Reference document
Same NSN cross-reference
Reference document — Secondary reference
56493Reference document
Same NSN cross-reference
Reference document — Secondary reference
6-1-1953-36-8AReference document
Same NSN cross-reference
Reference document — Secondary reference
710043Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 30102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30102?
30102 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Melissa & Doug.
What parts can replace 30102?
There are 9 known substitutes for 30102: 173067, K659, 659 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30102?
30102 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0668. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30102

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.