The Gearcase-Motor, cataloged under National Stock Number 3010-01-416-4534, is classified within Federal Supply Class 3010 (Torque Converters and Speed Changers) of the Mechanical Power Transmission Equipment group. The manufacturer of record is General Dynamics Motion Control Llc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3010-01-416-4534 |
| Primary Part Number | MG1125E-2250-039 |
| Item Name | Gearcase-Motor |
| FSC / FSG | 3010 / 30 — Torque Converters and Speed Changers |
| Manufacturer | General Dynamics Motion Control Llc |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 THREADED HOLE(S) |
| Duty Cycle | CONTINUOUS |
| Shaft Center to Mounting Surface Distance | 0.531 INCHES SINGLE END IN |
| Current Type | DC INPUT |
| Current Type | DC OUTPUT |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Height | 1.062 INCHES IN |
| Geared Head Output Shaft Alignment Position | INLINE W/ROTOR AXIS SINGLE END |
| Mounting Method | FACE |
| Cooling Method | AIR TO AIR COOLED |
| Shaft Rotation Direction | COUNTERCLOCKWISE SINGLE END |
| Mounting Facility Circle Diameter | 1.062 INCHES IN |
| Connection Type and Voltage Rating in Volts | 13.0 LINE TO LINE SINGLE INPUT |
| Torque Rating and Type | 150.0 INCH-OUNCES STALLED IN |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Width | 1.062 INCHES IN |
| Length of Shaft From Housing | 0.500 INCHES SINGLE END IN |
| Current Rating Method | LOCKED ROTOR AND NO LOAD |
| Shaft End Characteristic | A1 SINGLE STYLE SINGLE END |
| Terminal Type and Quantity | 2 BINDING POST |
| Temp Rating | -55.0 OPERATING FAHRENHEIT AND 100.0 OPERATING FAHRENHEIT |
| Inclosure Specification | COMMERCIAL |
| Geared Head Output Shaft Speed Rating | 150.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL D — Destroy Item |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MG1125E-2250-039 PRIMARY | General Dynamics Motion Control Llc (USA) |
| Reference | Meaning |
|---|---|
| 12917511 | 7/2 Vendor item drawing reference Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate |
NSN 3010-01-416-4534 is a Gearcase-Motor, manufactured by General Dynamics Motion Control Llc, classified under FSC 3010, Torque Converters and Speed Changers. Status: active.
NSN 3010-01-416-4534 has 1 manufacturer part number on file: MG1125E-2250-039 (General Dynamics Motion Control Llc).
Key specifications for MG1125E-2250-039: Mounting Facility Type and Quantity: 4 THREADED HOLE(S); Duty Cycle: CONTINUOUS; Shaft Center to Mounting Surface Distance: 0.531 INCHES SINGLE END IN; Current Type: DC INPUT. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 3010-01-416-4534 has DEMIL Code D. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.