PartsTable TECHNICAL DATA SHEET
NSN 3010-01-131-6189Government record, cited

Gearcase-Motor3010-01-131-6189

NSN 3010-01-131-6189 · NIIN 011316189
FSC 3010 — Torque Converters and Speed Changers · FSG 30 — Mechanical Power Transmission Equipment
Government record, cited
Also searched as  3010-01-131-6189 · 3010011316189 · NIIN 011316189 · 01-131-6189 · FSC 3010 Torque Converters and Speed Changers · 055-240-4 · 055-240 · 055-240-4 · 142
Nearby stock numbers  ·
Features
  • Gearcase-Motor — FSC 3010
  • Keyway Depth: 0.1875 INCHES NOMINAL SINGLE END IN
  • Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S)
  • Duty Cycle: CONTINUOUS
  • Shaft Diameter: 0.6242 INCHES NOMINAL SINGLE END IN
  • Shaft Center to Mounting Surface Distance: 1.670 INCHES SINGLE END IN
  • Angle of Shaft to Mounting Base: 90.0 DEGREES SINGLE END
  • Current Type: DC INPUT
Identification
  • NSN: 3010-01-131-6189
  • NIIN: 011316189
  • FSC: 3010 — Torque Converters and Speed Changers
  • FSG: 30 — Mechanical Power Transmission Equipment
General Description

The Gearcase-Motor, cataloged under National Stock Number 3010-01-131-6189, is classified within Federal Supply Class 3010 (Torque Converters and Speed Changers) of the Mechanical Power Transmission Equipment group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3010-01-131-6189
Item NameGearcase-Motor
FSC / FSG3010 / 30 — Torque Converters and Speed Changers
StatusACTIVE
Keyway Depth0.1875 INCHES NOMINAL SINGLE END IN
Mounting Facility Type and Quantity4 UNTHREADED HOLE(S)
Duty CycleCONTINUOUS
Shaft Diameter0.6242 INCHES NOMINAL SINGLE END IN
Shaft Center to Mounting Surface Distance1.670 INCHES SINGLE END IN
Angle of Shaft to Mounting Base90.0 DEGREES SINGLE END
Current TypeDC INPUT
Winding TypePERMANENT MAGNET
Geared Head Output Shaft Alignment PositionANGLED TO ARMATURE/ROTOR AXIS SINGLE END
Mounting MethodFACE
Cooling MethodAMBIENT AIR
Shaft Rotation DirectionCLOCKWISE OR COUNTERCLOCKWISE SINGLE END
Features ProvidedHORIZONTAL MOUNTING POSITION
Connection Type and Voltage Rating in Volts130.0 LINE TO NEUTRAL SINGLE INPUT
Keyway Length1.3875 INCHES NOMINAL SINGLE END IN
Nominal Center to Center Distance Between Mounting Facilities Parallel to Length3.000 INCHES IN
Torque Rating and Type36.0 INCH-POUNDS RUNNING IN
Keyway Width0.1875 INCHES NOMINAL SINGLE END IN
Nominal Center to Center Distance Between Mounting Facilities Parallel to Width3.250 INCHES IN
Length of Shaft From Housing1.500 INCHES SINGLE END IN
Enclosure FeatureTOTALLY ENCLOSED
Power Rating0.1250 HORSEPOWER OUTPUT
Shaft End CharacteristicA9 SINGLE STYLE SINGLE END
Terminal Type and Quantity3 WIRE LEAD
Geared Head Output Shaft Speed Rating16.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
055-240-4 5/9 Secondary reference
Danka Office Imaging Company
055-240 D/9 Drawing number reference only
Eastman Kodak Co Commercial & Government Systems
055-240-4 5/9 Secondary reference
Eastman Kodak Co Commercial & Government Systems
142 3/9 Design control — primary reference
Bodine Electric Company
No interchangeability data on file.
Other items in FSC 3010 — Torque Converters and Speed Changers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3010-00-010-0577
3010-00-010-0577 · Item name not on file
3010-00-267-4959
GRIDMEMBER,COUPLING
3010-00-267-4959
GRIDMEMBER,COUPLING
3010-00-267-4959
GRIDMEMBER,COUPLING
3010-00-356-3346
CLUTCH ASSEMBLY,FRICTION
3010-00-395-0188
CLUTCH,DRUM
3010-00-395-0188
CLUTCH,DRUM
3010-00-395-0188
CLUTCH,DRUM

Frequently Asked Questions

What is NSN 3010-01-131-6189?

NSN 3010-01-131-6189 is a Gearcase-Motor, classified under FSC 3010, Torque Converters and Speed Changers. Status: active.

What are the specifications of 3010-01-131-6189?

Key specifications for 3010-01-131-6189: Keyway Depth: 0.1875 INCHES NOMINAL SINGLE END IN; Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: CONTINUOUS; Shaft Diameter: 0.6242 INCHES NOMINAL SINGLE END IN. 25 specifications are documented in the U.S. Government catalog.

Is NSN 3010-01-131-6189 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com