PartsTable TECHNICAL DATA SHEET
NSN 3010-00-936-5365Government record, cited

Gearcase-Motor3010-00-936-5365

NSN 3010-00-936-5365 · NIIN 009365365
FSC 3010 — Torque Converters and Speed Changers · FSG 30 — Mechanical Power Transmission Equipment
Government record, cited
Also searched as  3010-00-936-5365 · 3010009365365 · NIIN 009365365 · 00-936-5365 · FSC 3010 Torque Converters and Speed Changers · 10545433 · 3010009365365 · U-216820 · CM20-371-008
Nearby stock numbers  ·
Features
  • Gearcase-Motor — FSC 3010
  • Mounting Facility Type and Quantity: 1 CLAMP COLLAR
  • Duty Cycle: CONTINUOUS
  • Phase: SINGLE OR TWO INPUT
  • Shaft Diameter: 0.1240 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM SINGLE END IN
  • Frequency in Hertz: 400.0 INPUT
  • Angle of Shaft to Mounting Base: 90.0 DEGREES SINGLE END
  • Current Type: AC INPUT
Identification
  • NSN: 3010-00-936-5365
  • NIIN: 009365365
  • FSC: 3010 — Torque Converters and Speed Changers
  • FSG: 30 — Mechanical Power Transmission Equipment
General Description

The Gearcase-Motor, cataloged under National Stock Number 3010-00-936-5365, is classified within Federal Supply Class 3010 (Torque Converters and Speed Changers) of the Mechanical Power Transmission Equipment group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3010-00-936-5365
Item NameGearcase-Motor
FSC / FSG3010 / 30 — Torque Converters and Speed Changers
StatusACTIVE
Mounting Facility Type and Quantity1 CLAMP COLLAR
Duty CycleCONTINUOUS
PhaseSINGLE OR TWO INPUT
Shaft Diameter0.1240 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM SINGLE END IN
Frequency in Hertz400.0 INPUT
Angle of Shaft to Mounting Base90.0 DEGREES SINGLE END
Current TypeAC INPUT
Winding TypeSERIES WOUND
Geared Head Output Shaft Alignment PositionINLINE W/ARMATURE SINGLE END
Mounting MethodCLAMP RING(S)
Cooling MethodAIR TO AIR COOLED
Shaft Rotation DirectionCOUNTERCLOCKWISE SINGLE END
Features ProvidedVERTICAL MOUNTING POSITION AND SINGLE PHASE ADAPTABILITY AND HORIZONTAL MOUNTING POSITION
Connection Type and Voltage Rating in Volts26.0 LINE TO NEUTRAL FIRST MULTIPLE OR 33.0 LINE TO NEUTRAL SECOND MULTIPLE OR 16.5 LINE TO NEUTRAL SINGLE INPUT
Torque Rating and Type1.562 INCH-POUNDS STALLED IN
Length of Shaft From Housing0.722 INCHES SINGLE END IN
Speed Control Method and Device TypeAUTOMATIC MECHANICAL
Enclosure FeatureTOTALLY ENCLOSED
Current Rating MethodLOCKED ROTOR
Shaft End CharacteristicA1 SINGLE STYLE SINGLE END
Terminal Type and Quantity6 WIRE LEAD
Temp Rating-54.0 OPERATING CELSIUS AND 165.0 OPERATING CELSIUS
Inclosure SpecificationCOMMERCIAL
Geared Head Output Shaft Speed Rating61.400 SINGLE REVOLUTIONS PER MINUTE SINGLE END
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
10545433 7/2 Vendor item drawing reference
Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
3010009365365 6/9 Informative reference only
E.c.a Etablissement Central Des Approvisionnements Des Forces Armees Royales
U-216820 5/2 Secondary reference
U.S. Government activity
CM20-371-008 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 3010 — Torque Converters and Speed Changers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3010-00-010-0577
3010-00-010-0577 · Item name not on file
3010-00-267-4959
GRIDMEMBER,COUPLING
3010-00-267-4959
GRIDMEMBER,COUPLING
3010-00-267-4959
GRIDMEMBER,COUPLING
3010-00-356-3346
CLUTCH ASSEMBLY,FRICTION
3010-00-395-0188
CLUTCH,DRUM
3010-00-395-0188
CLUTCH,DRUM
3010-00-395-0188
CLUTCH,DRUM

Frequently Asked Questions

What is NSN 3010-00-936-5365?

NSN 3010-00-936-5365 is a Gearcase-Motor, classified under FSC 3010, Torque Converters and Speed Changers. Status: active.

What are the specifications of 3010-00-936-5365?

Key specifications for 3010-00-936-5365: Mounting Facility Type and Quantity: 1 CLAMP COLLAR; Duty Cycle: CONTINUOUS; Phase: SINGLE OR TWO INPUT; Shaft Diameter: 0.1240 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM SINGLE END IN. 24 specifications are documented in the U.S. Government catalog.

Is NSN 3010-00-936-5365 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com