The Gearcase-Motor, cataloged under National Stock Number 3010-00-826-8290, is classified within Federal Supply Class 3010 (Torque Converters and Speed Changers) of the Mechanical Power Transmission Equipment group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3010-00-826-8290 |
| Item Name | Gearcase-Motor |
| FSC / FSG | 3010 / 30 — Torque Converters and Speed Changers |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 2 UNTHREADED HOLE(S) |
| Duty Cycle | INTERMITTENT |
| Phase | SINGLE INPUT |
| Shaft Diameter | 0.1250 INCHES NOMINAL SINGLE END IN |
| Frequency in Hertz | 60.0 INPUT |
| Angle of Shaft to Mounting Base | 90.0 DEGREES SINGLE END |
| Current Type | AC INPUT |
| Winding Type | INDUCTION-SHADED POLE |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Height | 1.750 INCHES IN |
| Geared Head Output Shaft Alignment Position | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| Mounting Method | PAD |
| Cooling Method | AMBIENT AIR |
| Time Interval | 6.0 MINUTES MAXIMUM ON |
| Shaft Rotation Direction | CLOCKWISE SINGLE END |
| Features Provided | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| Connection Type and Voltage Rating in Volts | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Width | 1.750 INCHES IN |
| Length of Shaft From Housing | 0.375 INCHES SINGLE END IN |
| Current Rating in Amps | 30.000 SINGLE OUTPUT |
| Enclosure Feature | TOTALLY ENCLOSED |
| Current Rating Method | LOAD |
| Power Rating | 0.3333 HORSEPOWER OUTPUT |
| Shaft End Characteristic | A1 SINGLE STYLE SINGLE END |
| Terminal Type and Quantity | 3 SOLDER LUG |
| Inclosure Specification | COMMERCIAL |
| Geared Head Output Shaft Speed Rating | 1.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| P19SAB0112A1XA08A274 | 5/9 Secondary reference Cramer Co Division of Chestnut Group Inc |
| 571JG600-B-0008A-10947 | 3/9 Design control — primary reference Cramer Co Division of Chestnut Group Inc |
NSN 3010-00-826-8290 is a Gearcase-Motor, classified under FSC 3010, Torque Converters and Speed Changers. Status: active.
Key specifications for 3010-00-826-8290: Mounting Facility Type and Quantity: 2 UNTHREADED HOLE(S); Duty Cycle: INTERMITTENT; Phase: SINGLE INPUT; Shaft Diameter: 0.1250 INCHES NOMINAL SINGLE END IN. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.