PartsTable TECHNICAL DATA SHEET
NSN 3010-00-635-4007Government record, cited

Gearcase-Motor3010-00-635-4007

NSN 3010-00-635-4007 · NIIN 006354007
FSC 3010 — Torque Converters and Speed Changers · FSG 30 — Mechanical Power Transmission Equipment
Government record, cited
Also searched as  3010-00-635-4007 · 3010006354007 · NIIN 006354007 · 00-635-4007 · FSC 3010 Torque Converters and Speed Changers
Nearby stock numbers  ·
Features
  • Gearcase-Motor — FSC 3010
  • Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S)
  • Duty Cycle: CONTINUOUS
  • Phase: SINGLE INPUT
  • Shaft Diameter: 0.3125 INCHES NOMINAL SINGLE END IN
  • Frequency in Hertz: 60.0 INPUT
  • Shaft Center to Mounting Surface Distance: 2.370 INCHES SINGLE END IN
  • Current Type: AC INPUT
Identification
  • NSN: 3010-00-635-4007
  • NIIN: 006354007
  • FSC: 3010 — Torque Converters and Speed Changers
  • FSG: 30 — Mechanical Power Transmission Equipment
General Description

The Gearcase-Motor, cataloged under National Stock Number 3010-00-635-4007, is classified within Federal Supply Class 3010 (Torque Converters and Speed Changers) of the Mechanical Power Transmission Equipment group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3010-00-635-4007
Item NameGearcase-Motor
FSC / FSG3010 / 30 — Torque Converters and Speed Changers
StatusACTIVE
Mounting Facility Type and Quantity4 UNTHREADED HOLE(S)
Duty CycleCONTINUOUS
PhaseSINGLE INPUT
Shaft Diameter0.3125 INCHES NOMINAL SINGLE END IN
Frequency in Hertz60.0 INPUT
Shaft Center to Mounting Surface Distance2.370 INCHES SINGLE END IN
Current TypeAC INPUT
Winding TypeINDUCTION-SQUIRREL CAGE
Geared Head Output Shaft Alignment PositionOFFSET RIGHT PARALLEL TO SHAFT AXIS SINGLE END
Cooling MethodSELF-VENTILATED
Shaft Rotation DirectionCLOCKWISE OR COUNTERCLOCKWISE SINGLE END
Features ProvidedHORIZONTAL MOUNTING POSITION
Connection Type and Voltage Rating in Volts115.0 LINE TO NEUTRAL SINGLE INPUT
Nominal Center to Center Distance Between Mounting Facilities Parallel to Length3.375 INCHES IN
Nominal Center to Center Distance Between Mounting Facilities Parallel to Width3.875 INCHES IN
Length of Shaft From Housing0.660 INCHES SINGLE END IN
Enclosure FeatureINDUSTRIAL
Power Rating0.0500 HORSEPOWER OUTPUT
Shaft End CharacteristicA1 SINGLE STYLE SINGLE END
Terminal Type and Quantity4 SOLDER LUG
Temp Rating50.0 AMBIENT CELSIUS
Inclosure SpecificationCOMMERCIAL
Geared Head Output Shaft Speed Rating1240.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL Q — CCL Item — Commerce Control List
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
146191 3/9 Design control — primary reference
Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

Frequently Asked Questions

What is NSN 3010-00-635-4007?

NSN 3010-00-635-4007 is a Gearcase-Motor, classified under FSC 3010, Torque Converters and Speed Changers. Status: active.

What are the specifications of 3010-00-635-4007?

Key specifications for 3010-00-635-4007: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: CONTINUOUS; Phase: SINGLE INPUT; Shaft Diameter: 0.3125 INCHES NOMINAL SINGLE END IN. 23 specifications are documented in the U.S. Government catalog.

Is NSN 3010-00-635-4007 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 3010-00-635-4007?

NSN 3010-00-635-4007 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com