PartsTable TECHNICAL DATA SHEET
NSN 3010-00-174-5794Government record, cited

Gearcase-Motor3010-00-174-5794

NSN 3010-00-174-5794 · NIIN 001745794
FSC 3010 — Torque Converters and Speed Changers · FSG 30 — Mechanical Power Transmission Equipment
Government record, cited
Also searched as  3010-00-174-5794 · 3010001745794 · NIIN 001745794 · 00-174-5794 · FSC 3010 Torque Converters and Speed Changers · B00003 · FB33L3-23C168B8T10H
Nearby stock numbers  ·
Features
  • Gearcase-Motor — FSC 3010
  • Mounting Facility Type and Quantity: 4 THREADED HOLE(S)
  • Duty Cycle: CONTINUOUS
  • Phase: SINGLE INPUT
  • Shaft Diameter: 0.250 INCHES NOMINAL SINGLE END IN
  • Frequency in Hertz: 55.0 OR 65.0 INPUT
  • Angle of Shaft to Mounting Base: 90.0 DEGREES SINGLE END
  • Current Type: AC INPUT
Identification
  • NSN: 3010-00-174-5794
  • NIIN: 001745794
  • FSC: 3010 — Torque Converters and Speed Changers
  • FSG: 30 — Mechanical Power Transmission Equipment
General Description

The Gearcase-Motor, cataloged under National Stock Number 3010-00-174-5794, is classified within Federal Supply Class 3010 (Torque Converters and Speed Changers) of the Mechanical Power Transmission Equipment group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3010-00-174-5794
Item NameGearcase-Motor
FSC / FSG3010 / 30 — Torque Converters and Speed Changers
StatusACTIVE
Mounting Facility Type and Quantity4 THREADED HOLE(S)
Duty CycleCONTINUOUS
PhaseSINGLE INPUT
Shaft Diameter0.250 INCHES NOMINAL SINGLE END IN
Frequency in Hertz55.0 OR 65.0 INPUT
Angle of Shaft to Mounting Base90.0 DEGREES SINGLE END
Current TypeAC INPUT
Hole Center to Shaft End Distance0.180 INCHES NOMINAL SINGLE END IN
Winding TypeINDUCTION-WOUND ROTOR
Geared Head Output Shaft Alignment PositionOFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END
Mounting MethodFIXED BASE
Cooling MethodAMBIENT AIR
Shaft Rotation DirectionCLOCKWISE SINGLE END
Features ProvidedVERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION
Connection Type and Voltage Rating in Volts24.0 LINE TO NEUTRAL SINGLE INPUT
Nominal Center to Center Distance Between Mounting Facilities Parallel to Length1.250 INCHES IN
Torque Rating and Type10.0 INCH-POUNDS STARTING IN
Nominal Center to Center Distance Between Mounting Facilities Parallel to Width1.562 INCHES IN
Length of Shaft From Housing0.610 INCHES SINGLE END IN
Speed Control Method and Device TypeELECTRICAL REMOTE
Enclosure FeatureOPEN PROTECTED
Shaft End CharacteristicA13 SINGLE STYLE SINGLE END
Terminal Type and Quantity2 BINDING POST
Temp Rating-10.0 OPERATING CELSIUS AND 65.0 AMBIENT CELSIUS
Hole Diameter0.110 INCHES NOMINAL SINGLE END IN
Geared Head Output Shaft Speed Rating23.000 LOW REVOLUTIONS PER MINUTE AND 33.000 HIGH REVOLUTIONS PER MINUTE SINGLE END
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
B00003 3/9 Design control — primary reference
Scientific Radio Systems Inc
FB33L3-23C168B8T10H 5/9 Secondary reference
Brevel Products Corp
No interchangeability data on file.
Other items in FSC 3010 — Torque Converters and Speed Changers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3010-00-010-0577
3010-00-010-0577 · Item name not on file
3010-00-267-4959
GRIDMEMBER,COUPLING
3010-00-267-4959
GRIDMEMBER,COUPLING
3010-00-267-4959
GRIDMEMBER,COUPLING
3010-00-356-3346
CLUTCH ASSEMBLY,FRICTION
3010-00-395-0188
CLUTCH,DRUM
3010-00-395-0188
CLUTCH,DRUM
3010-00-395-0188
CLUTCH,DRUM

Frequently Asked Questions

What is NSN 3010-00-174-5794?

NSN 3010-00-174-5794 is a Gearcase-Motor, classified under FSC 3010, Torque Converters and Speed Changers. Status: active.

What are the specifications of 3010-00-174-5794?

Key specifications for 3010-00-174-5794: Mounting Facility Type and Quantity: 4 THREADED HOLE(S); Duty Cycle: CONTINUOUS; Phase: SINGLE INPUT; Shaft Diameter: 0.250 INCHES NOMINAL SINGLE END IN. 26 specifications are documented in the U.S. Government catalog.

Is NSN 3010-00-174-5794 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com