PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 301-37-06-08-08
301-37-06-08-08 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES SECOND END, temp_rating: -40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B SECOND END, connection_type: THREADED INTERNAL TUBE SECOND END, inside_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-431-1358, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
301-37-06-08-08
NSN: 4720-01-431-1358
FSC: 4720
CAGE: 61463 — LANXESS CORPORATION (USA)
SPECIFICATIONS
flow_angle45.0 DEGREES SECOND END
seat_angle37.0 DEGREES SECOND END
temp_rating-40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B SECOND END
connection_typeTHREADED INTERNAL TUBE SECOND END
inside_diameter0.500 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.880 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure14000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES SECOND END IN
NSN4720-01-431-1358
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 301-37-06-08-08 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
BURST TEST PRESSURE: 14000.0 POUNDS PER SQUARE INCH LBS
•
THREAD CLASS: 3B SECOND END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
MINIMUM INSIDE BENDING RADIUS: 7.000 INCHES IN
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEROUND
SEAT ANGLE37.0 DEGREES FIRST END
BURST TEST PRESSURE14000.0 POUNDS PER SQUARE INCH LBS
THREAD CLASS3B SECOND END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
THREAD CLASS3B FIRST END
MINIMUM INSIDE BENDING RADIUS7.000 INCHES IN
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
MEASURING METHOD AND LENGTH24.000 INCHES NOMINAL OVERALL IN
FLOW ANGLE45.0 DEGREES SECOND END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
9019643Interchangeable
interchangeable cross-reference
interchangeable
P427Interchangeable
interchangeable cross-reference
interchangeable
9019-6.0Interchangeable
interchangeable cross-reference
interchangeable
78C-6N-6N-20-24-20-24-270Interchangeable
interchangeable cross-reference
interchangeable
9019-6.4.2Interchangeable
interchangeable cross-reference
interchangeable
881-39-06-16-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 301-37-06-08-08?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 301-37-06-08-08?
301-37-06-08-08 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 301-37-06-08-08?
There are 9 known substitutes for 301-37-06-08-08: 9019643, P427, 9019-6.0 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 301-37-06-08-08?
301-37-06-08-08 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-431-1358. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 301-37-06-08-08

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026