PartsTable
Technical Data Sheet
PartsTable / MRO / 301-29
301-29 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DUMMY LOAD,ELECTRICAL is a the manufacturer industrial component. Key specifications include height: 1.032 INCHES NOMINAL IN, material: STEEL COMP 1010 OVERALL, drive_type: DIRECT, scale_type: LINEAR SINGLE SCALE, hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-164-3815, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 301-29
NSN: 5330-00-164-3815
FSC: 5330
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
height1.032 INCHES NOMINAL IN
materialSTEEL COMP 1010 OVERALL
drive_typeDIRECT
scale_typeLINEAR SINGLE SCALE
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.875 INCHES NOMINAL IN
cooling_methodSELF-COOLED
overall_length1.540 INCHES MAXIMUM IN
outside_diameter1.975 INCHES NOMINAL IN
overall_diameter0.500 INCHES MAXIMUM IN
special_featuresRADIAL BRISTLE, 400 GRADE CUBITRON GRAIN, FOR DEBURRING OR COATING REMOVAL; DIAMETER: 3 INCH, CENTER HOLE DIAMETER: 3/8 INCH; COLOR: BLUE IN
style_designatorCOAXIAL MOUNTED
NSN5330-00-164-3815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 301-29 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
BOLT CIRCLE DIAMETER: 2.375 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OVERALL
•
SIDE RADIUS FROM GASKET CENTER: 1.094 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
APERTURE DIAMETER1.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
BOLT CIRCLE DIAMETER2.375 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OVERALL
SIDE RADIUS FROM GASKET CENTER1.094 INCHES NOMINAL IN
OVERALL WIDTH2.875 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
HOLE DIAMETER0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
301-29Interchangeable
interchangeable cross-reference
interchangeable
26040Interchangeable
interchangeable cross-reference
interchangeable
52029Interchangeable
interchangeable cross-reference
interchangeable
58-10027Interchangeable
interchangeable cross-reference
interchangeable
L312002543Interchangeable
interchangeable cross-reference
interchangeable
10467Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 301-29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 301-29?
301-29 is a DUMMY LOAD,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 301-29?
There are 13 known substitutes for 301-29: 301-29, 26040, 52029 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 301-29?
301-29 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-164-3815. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 301-29

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026