PartsTable
Technical Data Sheet
Download PDF

301-14712 — SCREW,TAPPING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

301-14712: SCREW,TAPPING.

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: PAN, head_height: 0.139 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN, head_diameter: 0.407 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN, fastener_length: 0.750 INCHES NOMINAL IN, surface_treatment: ZINC OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-314-5488, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
301-14712
NSN: 5305-01-314-5488
FSC: 5305 — Screws
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_stylePAN
head_height0.139 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
head_diameter0.407 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
fastener_length0.750 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
nonmachine_thread_styleDRIVE SCREW (TYPE U)
nonmachine_nominal_thread_diameter0.216 INCHES IN
NSN5305-01-314-5488
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 301-14712 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
HEAD HEIGHT: 0.139 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
NONMACHINE THREAD STYLE: DRIVE SCREW (TYPE U)
•
HEAD STYLE: PAN
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
HEAD DIAMETER: 0.407 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.216 INCHES IN
HEAD HEIGHT0.139 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
NONMACHINE THREAD STYLEDRIVE SCREW (TYPE U)
HEAD STYLEPAN
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL OVERALL
HEAD DIAMETER0.407 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
168-78Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 301-14712?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 301-14712?
301-14712 is a SCREW,TAPPING.
What parts can replace 301-14712?
There is 1 known substitute for 301-14712: 168-78. Substitute compatibility should be verified for your specific system.
What is the NSN for 301-14712?
301-14712 is cataloged in the U.S. Government catalog under NSN 5305-01-314-5488. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 301-14712

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.