PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 30098
30098 ✓ Verified by PartsTable
Legrand · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

This cable allows you to connect the output on your sound card to a hi-fi amplifier. Key specifications include material: STEEL OVERALL, shank_style: FLAT ROUND, flute_length: 3.125 INCHES NOMINAL IN, overall_length: 6.000 INCHES NOMINAL IN, shank_diameter: 0.500 INCHES NOMINAL IN, special_features: REDUCED 1/2 IN. DIA SHANK; FRACTIONAL SIZE 39/64 IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-025-7776, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30098
NSN: 5310-00-025-7776
FSC: 5310
CAGE: 11599 — TRIUMPH ENGINE CONTROL SYSTEMS LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_styleFLAT ROUND
flute_length3.125 INCHES NOMINAL IN
flute_quantity2
overall_length6.000 INCHES NOMINAL IN
shank_diameter0.500 INCHES NOMINAL IN
special_featuresREDUCED 1/2 IN. DIA SHANK; FRACTIONAL SIZE 39/64 IN
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.6094 INCHES IN
cutting_rotation_directionRIGHT-HAND
NSN5310-00-025-7776
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 30098 · Legrand ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OVERALL DIAMETER: 0.440 INCHES NOMINAL IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
THICKNESS: 0.030 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.314 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 301 OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL DIAMETER0.440 INCHES NOMINAL IN
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.030 INCHES NOMINAL IN
HOLE DIAMETER0.314 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
MATERIALSTEEL COMP 301 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
2D150Interchangeable
interchangeable cross-reference
interchangeable
600138Interchangeable
interchangeable cross-reference
interchangeable
32145VInterchangeable
interchangeable cross-reference
interchangeable
30098Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30098?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30098?
30098 is a CUP,TAPERED ROLLER BEARING manufactured by Legrand.
What parts can replace 30098?
There are 4 known substitutes for 30098: 2D150, 600138, 32145V and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30098?
30098 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-025-7776. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30098

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026