PartsTable
Technical Data Sheet
Download PDF

300885 — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

300885: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.160 INCHES NOMINAL IN, cooling_type: WATER, flange_width: 0.2290 INCHES NOMINAL IN, body_diameter: 0.090 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-733-4704, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 300885
NSN: 3110-00-733-4704
NIINs: 007334704, 010778290, 012516855
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: H0G87 — WIBA ZEVENAAR B.V. (NLD)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length0.160 INCHES NOMINAL IN
cooling_typeWATER
flange_width0.2290 INCHES NOMINAL IN
body_diameter0.090 INCHES NOMINAL IN
bore_diameter1.9375 INCHES NOMINAL IN
overall_width1.0150 INCHES NOMINAL IN
surface_finishGROUND
terminal_length1.250 INCHES MINIMUM IN
style_designatorOUTER RING, ROLLER, FLANGED
terminal_diameter0.016 INCHES NOMINAL IN
NSN3110-00-733-4704
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 300885 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE OUTSIDE DIAMETER: 3.6250 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: OUTER RING, ROLLER, FLANGED
•
SMALLEST OUTSIDE DIAMETER: 2.9980 INCHES MINIMUM AND 3.0020 INCHES MAXIMUM IN
•
FLANGE WIDTH: 0.2290 INCHES NOMINAL IN
•
BORE DIAMETER: 1.9375 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1340H OVERALL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
FLANGE OUTSIDE DIAMETER3.6250 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATOROUTER RING, ROLLER, FLANGED
OVERALL WIDTH1.0150 INCHES NOMINAL IN
SMALLEST OUTSIDE DIAMETER2.9980 INCHES MINIMUM AND 3.0020 INCHES MAXIMUM IN
FLANGE WIDTH0.2290 INCHES NOMINAL IN
BORE DIAMETER1.9375 INCHES NOMINAL IN
MATERIALSTEEL COMP 1340H OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
10875398Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2530007334704Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 300885?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 300885?
300885 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 300885?
There are 2 known substitutes for 300885: 10875398, 2530007334704. Substitute compatibility should be verified for your specific system.
What is the NSN for 300885?
300885 is cataloged in the U.S. Government catalog under NSN 3110-00-733-4704. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 300885

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.